3 ms·

>so what would you trust? Physics. Their not being an unnoticed second camera/microphones/etc. If you main concern is that your computer will be used to spy o

>so what would you trust? Physics. Their not being an unnoticed second camera/microphones/etc. If you main concern is that your computer will be used to spy on your physical life, then having verified switches can give you confidence from first principles that it it has no way of observing you (modulo secondary sensors that you did not notice.)

tree_of_item 10y ago
Physics? Can you go in to some detail as to what you mean by this? You can't see physics with your eyes.
JadeNB 10y ago
> having verified switches can give you confidence from first principles that it it has no way of observing you Right, but this is what I meant to ask: how does one verify a switch that has been manufactured by someone else? I suppose that an electrical engineer could check the schematics, but how do you verify that the actual hardware in your device matches the schematics?
- gizmo686 10y ago
  Switches are very simple devices. If the switch mechanism is not enclosed, it is easy to look one and see that the input leads are separated by the output leads by an air gap. Of course, a sufficiently motivated attacker could still work around this (by eg, by finding a side channel, or having the plastic of the switch be somewhat conductive). However, these attacks are far more difficult, and far less plausibly deniable.
  - kevhito 10y ago
    > Switches are very simple devices. If the switch mechanism is not enclosed, ... Sarcasm, I hope? I spent an hour this weekend replacing some micro switches in some decrepit robots. These are about 5mm^3, which is pretty tiny, but huge on the scale of a modern phone. They are basically hunks of plastic with a button on one side and six or so leads coming out the other side. No, you can't open them up and see the air gap without destroying them. And yes, they are small enough to easily contain a full CPU, some flash memory, and a few sensors, even though they only really need a few sliding metal and plastic bits.
    - gizmo686 10y ago
      Sorry if I wasn't being clear. My point is that it is possibly to have switches that are easily verifiable. Most switches that exists are not because there is no motivation to make them so.
      - nitrogen 10y ago
        They should be easy to xray.
TeMPOraL 10y ago
My guess is you haven't seen this yet: https://www.youtube.com/watch?v=RkTvDjhImwo https://www.youtube.com/watch?v=RkTvDjhImwo

tree_of_item 10y ago

Physics? Can you go in to some detail as to what you mean by this? You can't see physics with your eyes.

JadeNB 10y ago

> having verified switches can give you confidence from first principles that it it has no way of observing you Right, but this is what I meant to ask: how does one verify a switch that has been manufactured by someone else? I suppose that an electrical engineer could check the schematics, but how do you verify that the actual hardware in your device matches the schematics?

gizmo686 10y ago
Switches are very simple devices. If the switch mechanism is not enclosed, it is easy to look one and see that the input leads are separated by the output leads by an air gap. Of course, a sufficiently motivated attacker could still work around this (by eg, by finding a side channel, or having the plastic of the switch be somewhat conductive). However, these attacks are far more difficult, and far less plausibly deniable.
- kevhito 10y ago
  > Switches are very simple devices. If the switch mechanism is not enclosed, ... Sarcasm, I hope? I spent an hour this weekend replacing some micro switches in some decrepit robots. These are about 5mm^3, which is pretty tiny, but huge on the scale of a modern phone. They are basically hunks of plastic with a button on one side and six or so leads coming out the other side. No, you can't open them up and see the air gap without destroying them. And yes, they are small enough to easily contain a full CPU, some flash memory, and a few sensors, even though they only really need a few sliding metal and plastic bits.
  - gizmo686 10y ago
    Sorry if I wasn't being clear. My point is that it is possibly to have switches that are easily verifiable. Most switches that exists are not because there is no motivation to make them so.
    - nitrogen 10y ago
      They should be easy to xray.

TeMPOraL 10y ago

My guess is you haven't seen this yet: https://www.youtube.com/watch?v=RkTvDjhImwo https://www.youtube.com/watch?v=RkTvDjhImwo