6 ms·
The case of the 500-mile email
- doron 17y agoRecalling older versions of sendmail literally sent a shiver down my spine, we had something akin to a voodoo ritual whenever we needed to change some configuration.
- gjm11 17y agoA lovely story (which I urge anyone reading this to go and read; it's much geekier than it probably sounds). But wait: isn't there a factor-of-2 error right at the end, and doesn't that rather spoil it? Or am I missing something?
- CoreDumpling 17y agoThe author admits to taking some liberties with the story, which he clarifies here (you appear to be concerned about #8): http://www.ibiblio.org/harris/500milemail-faq.html http://www.ibiblio.org/harris/500milemail-faq.html
- decadentcactus 17y agoRead it before, but enjoyed reading it again.
- jerf 17y agoInterestingly, this story actually helped me once. I was debugging an issue where some people in the multi-national company I work for (many offices) could connect to the server and some people could not, and it was thanks to this story that I seriously entertained the possibility that it had something to do with timing, due to the geographical distribution of the problem reports. Subsequent investigation revealed that for various uninteresting technical reasons, the server was setting a 200ms timeout on the SSL negotiation part of the connection, which closely matched the ping times of the participants, including the people who could sometimes connect and sometimes not. And I discovered this far faster by knowing I should be poking around on timing issues, rather than searching out something deeper. (I am deliberately eliding other details not relevant to this aspect of the story. My point is merely that I am glad I had encountered it. Could easily have saved me a day or two.)
- evansolomon 17y agoThis was posted a while back, very entertaining story: http://news.ycombinator.com/item?id=385068 http://news.ycombinator.com/item?id=385068
- chaosmachine 17y agoJust over 500 days ago...
- deleted 17y ago[deleted]
- mcav 17y agoMost interesting to me was the "units" utility. I didn't know it existed.
- derwiki 17y agoI wouldn't have even thought to look for such a program. And this is how I justify reading stories like this :)
- groaner 17y agoI think fewer people are aware of it these days when you can simply hit up google: http://www.google.com/search?q=.003+light+seconds+in+miles http://www.google.com/search?q=.003+light+seconds+in+miles Though it seems they haven't gotten millilightseconds to work.
- vtail 17y agoAs always, WolframAlpha is your friend: http://www.wolframalpha.com/input/?i=3+millilight+seconds http://www.wolframalpha.com/input/?i=3+millilight+seconds 558.8 miles or 899.4 kilometers They even have "comparisons", e.g. for 30 millilight seconds: ~~ 1.4 x Amazon River length (~~ 6400 km )
- chbarts 17y agoTake a look at the data file (/usr/share/misc/units.dat) some time. It's an interesting little declarative non-Turing-complete DSL, in addition to being a handy reference manual.
- gxs 17y agoRelevant FAQ about the story by the author of the story: http://www.ibiblio.org/harris/500milemail-faq.html http://www.ibiblio.org/harris/500milemail-faq.html
- chime 17y agoThis one has made the rounds on reddit a few times. I shared this personal story last time it came around: In 2005 at my job we had a pretty severe problem just as unexplainable. The day after an unscheduled closing (hurricane), I started getting calls from users complaining about database connection timeouts. Since I had a very simple network with less than 32 nodes and barely any bandwidth in use, it was quite scary that I could ping to the database server for 15-20 minutes and then get "request timed out" for about 2 minutes. I had performance monitors etc. running on the server and was pinging the server from multiple sources. Pretty much every machine except the server was able to talk to the others constantly. I tried to isolate a faulty switch or a bad connection but there was no way to explain the random yet periodic failures. I asked my coworker to observe the lights on a switch in the warehouse while I ran trace routes and unplugged different devices. After 45-50 minutes on the walkie-talkie with him saying "ya it's down, ok it's back up," I asked if he noticed any patterns. He said, "Yeah... I did. But you're going to think I'm nuts. Every time the shipper takes away a pallet from the shipping room, the server times out within 2 seconds." I said "WHAT???" He said "Yeah. And the server comes back up once he starts processing the next order." I ran down to see the shipper and was certain that he was plugging in a giant magnetomaxonizer to celebrate the successful completion of an order. Surely the electromagnetic waves from the flux capacitor were causing rip in the space-time continuum and temporarily shorting out the server's NIC card 150 feet away in another room. Nope. All he was doing was loading up the bigger boxes on the pallet first and then gradually the smaller ones on top, while scanning every box with the wireless barcode scanner. Aha! It must be the barcode scanner's wireless features that probably latch on to the database server and cause all other requests to fail. Nope. Few tests later I realized it wasn't the barcode scanner since it was behaving pretty nicely. The wireless router and it's UPS in the shipping room were configured right and seemed to be functioning normally too. It had to be something else, especially since everything was working fine just before the hurricane closing. As soon as the next time out started, I ran into the shipping room and watched the guy load the next pallet. The moment he placed four big boxes of shampoo on the bottom row of the pallet, the database server stopped timing out! This had to be black magic! I asked him to remove the boxes and the database server began to time out again! I did not believe the absurdity of this and spent five more minutes loading and unloading the boxes of shampoo with the same exact result. I was about to fall down on my knees and start begging for mercy from the God of Ethernet when I noticed that the height at which the wireless router was placed in the shipping room was about a foot lower than the top of the four big boxes when placed on the pallet. We were finally on to something! The wireless router lost the line-of-sight to the outside warehouse anytime a pallet was loaded with the big boxes. Ten minutes later I had the problem solved. Here is what happened. During the hurricane, there was a power failure that reset the only device in our building that wasn't connected to a UPS - a test wireless router I had in my office. The default settings on the test router somehow made it a repeater for the only other wireless router we had, the one in the shipping room. The two wireless nodes were only able to talk to each other when there were no pallets placed between them and even then the signal wasn't too strong. Every time the two wireless routers managed to talk, they created a loop in my tiny network and as a result, all packets to the database server were lost. The database server had it's own switch from the main router and hence was pretty much the furthest node. Most other PC's were on the same 16-port switch so I had no problems pinging constantly between them. The 1-second solution to this four-hour troubleshooting nightmare was me yanking off the power to the test router. And the database server never timed out again.
- grk 17y agoI like how the boss tried to figure out what's wrong before complaining. Now it's usually "AAA IT'S BROKEN GO FIX IT".
- JustinSeriously 17y agoMe too. Though in this case the "boss" was a statistician. The way the professor initially gathered data, instead of immediately asking for help like a normal user, made me think this was going to turn into a joke. Like the one that begins with, "a manager, an engineer, and a programmer are driving through the mountains..."
- miles 17y agoIf you're running OS X, it pays to grab gunits http://gunits.darwinports.com/ http://gunits.darwinports.com/ Here's why: $ units 500 units, 54 prefixes $ gunits 2411 units, 71 prefixes, 33 nonlinear units
- ianferrel 17y agoCan you provide an example of a nonlinear unit?
- moxiemk1 17y agoThey mean that the conversion is defined by a function rather than a scaling factor. The example that the manual gives is Centigrade to Fahrenheit, which, interestingly enough, is a linear function. http://www.gnu.org/software/units/manual/units.html#Nonlinear-units http://www.gnu.org/software/units/manual/units.html#Nonlinea...
- lmkg 17y agoIt depends on your definition of linear. In some algebra contexts you would call it a linear function because it's a line, but in linear algebra you would not consider it a linear transformation because it doesn't pass through the origin[1]. It would be more accurate to call it "affine." [1] More generally, being "linear" means that f(ax+y) = af(x) + f(y) for constant a and variables x, y. From this, it follows that f(0) = 0 for linear transformations.
- demallien 17y agoFascinating, although I'm guessing the author isn't an electrical engineer, because for me, the timeout on the messages would have been the absolute first thing that I checked as soon as I'd confirmed the 500 mile limit. Although that's probably because I spent a certain amount of time at the start of my career detecting faults in fibre optic and copper installations using reflectometers to work out how far down the line the problem was...