5 ms·

I'm surprised how on discussions about the 'butterfly ballot', the impact of the viewing angle is rarely mentioned. See these images [1][2][3] that show that as

• bouncingsoul 10y ago
  ATMs have the same problem with viewing angles. It's funny with those too because that interface will always be used at extreme angles: From above (potentially) when a person is standing at an ATM, from straight on if they happen to match the ATM's screen height, and from below if someone is sitting in their car. A good case for touch screens, where the label is the interaction point.
  • ygra 10y ago
    Never seen an ATM to be used from a car, but as for touch screens, many of those have severe alignment problems that would get even worse due to parallax when used from wildly different viewing angles. Requires you to have even larger buttons to counteract that or frustration sets in where people constantly get the impression their touches don't register (just because they manage to hit slightly below the button). ATMs I tend to use have the following design: https://www.sparkasse-einbeck.de/module/aktion_if/wunsch-pin/pixel/wunsch_pin_1.jpg https://www.sparkasse-einbeck.de/module/aktion_if/wunsch-pin... with a row of four large physical buttons to the left and right of the screen. It's impossible to get a viewing angle extreme enough that this gets ambiguous.
    • mikeash 10y ago
      Around here (Washington, DC area) drive-up ATMs are fairly common at banks which have drive-through service. Having used both types of ATMs, I find the touch-screen ones less error prone. The touch targets are always gigantic. They pretty much have to be anyway to ensure that everybody can read the labels. I just touch what I want and it works. For ATMs with physical buttons on the side, I always have to crouch down to get the right angle so I can figure out which button does what. With the ones I've used, it's quite easy to get a viewing angle where it's ambiguous.
      • DrScump 10y ago
        In my area, there are several banks that had drive-up ATMs at some point, but most are unused nowadays. One feature they had in common: each function button had Braille (raised dots for the blind) instructions also. Yes, Braille. On the driver's side. This could explain much of what I encounter on the roads.
    • niftich 10y ago
      Some filling stations also use the arrangement of four buttons on either side of a large dot matrix screen, for a total of eight buttons. But even this has alignment problems -- ones I've experienced personally despite images being difficult to find. But these [1][2] show the problem: the options listed on the in-set screen come out of alignment with the buttons at extreme angles. That, coupled with other design decisions [3] makes some filling stations frustrating to use. [1] http://wlbpa.org/wp-content/uploads/2014/02/gas-pump.jpg http://wlbpa.org/wp-content/uploads/2014/02/gas-pump.jpg [2] http://image.mlive.com/home/mlive-media/width620/img/kzgazette_impact/photo/18967742-mmmain.jpg http://image.mlive.com/home/mlive-media/width620/img/kzgazet... [3] http://dbhurley.com/media/uploads/2016/03/bad_ui_gas_station-1024x768.jpg http://dbhurley.com/media/uploads/2016/03/bad_ui_gas_station...
    • nommm-nommm 10y ago
      Here's examples https://www.ncr.com/sites/default/files/WrightPatt_InteractiveTeller_SelfServ38_3-300x200.jpg https://www.ncr.com/sites/default/files/WrightPatt_Interacti... http://image.shutterstock.com/z/stock-photo-woman-making-a-deposit-at-a-drive-up-atm-2671605.jpg http://image.shutterstock.com/z/stock-photo-woman-making-a-d...
• nogbit 10y ago
  That is abysmal design, so many things wrong with it!