5 ms·
The japanese companies were pretty amazing in the commercial space. My employer had a few Fujitsu ultra portables in the circa 2007 timeframe. One of our inter
by Spooky23 10y ago
The japanese companies were pretty amazing in the commercial space.
My employer had a few Fujitsu ultra portables in the circa 2007 timeframe. One of our internal customers mentioned to a salesguy that they needed a particular port in a particular location on the laptop, not expecting anything. Two weeks later, they Fedexed a loaner/prototype with the port.
Really an amazing experience. We were buying 5-6 figure quantities of Dells and HP, and they could barely handle trivial requests re packaging, etc.
- Johnny555 10y agoYou were buying 10,000 - 100,000 laptops, or $10,000 - $100,000 worth of laptops (around 5 - 50 at $2000 each)? If it's the former, I'm surprised they didn't package them anyway you want. If the latter, I'm not surprised they wouldn't make any changes.
- philtar 10y agoIt's probably the latter. You can be not surprised, that's fine. You probably seem hard to impress as you just glossed over the fact that fujitsu did that for them.
- notoothpaste 10y agoI wonder what their manufacturing processes are like, such that they could accommodate this kind of flexibility.
- dba7dba 10y agoIt was probably more like having some engineers and guys in shop/factory work weekend to meet the demand, on top of what they were already supposed to do.
- notoothpaste 10y agoIn order to create a prototype with a port in a different location, they would need, at the very least, to produce a one-off motherboard PCB, and a one-off injection molded case. That they could justify doing so to produce near production quality results for a small order either indicates impressive manufacturing flexibility, or an inefficient manufacturing process.
- lisivka 10y agoTheir process is implemented for flexibility first, then for mass production. Look at Toyota fabric [1]. Do you see lot of advanced robots to reprogram for each new model? [1]: https://www.youtube.com/watch?v=hg5RlapdEtE https://www.youtube.com/watch?v=hg5RlapdEtE
- notoothpaste 10y agoSo how is/was Fujitsu's laptop manufacturing tailored toward flexibility? I want the details. If all you can do is passive aggressively repeat vague ideas that were printed in mainstream management and manufacturing texts decades ago, don't respond at all. Nobody cares about or wants your input.
- yaakov34 10y agoAnd you think that someone from Fujitsu (where it's 8 in the evening, BTW) is going to jump in here and explain their factory layout to you, because you've put your foot down? The best general answer you are going to get is "They made it using whatever process they used to make prototypes. Probably". You want names, ranks, and serial numbers - try writing to Fujitsu. Preferably while being more polite.
- notoothpaste 10y agoSo in other words, you have nothing useful to contribute, but wikiable factoids. Don't fucking respond. It would be better for everyone involved if the thread died, than if I wasted my time trying to cajole information out of people that clearly know no more than I do. This entire thread was me taking a shot in the dark to see if any experienced EEs/industrial engineers/etc. had any interesting insight to give on the subject. Stroking your dick at your amateur understanding of manufacturing processes serves no-one but yourself. I understand this is a hard impulse for people like you to overcome, but you don't have to respond to every post you see. Next time, try shutting the fuck up when someone asks a question that you can't respond to. I don't know everything, and I don't pretend to know everything, so I don't condescend towards people unless I know I have a world-class understanding of a topic. I would rather have my score at -50 and be forced to create another account, than argue with people that have NOTHING to contribute but want to give me shit for asking questions that their pea brains aren't equipped to answer. EDIT: Wish I could have had a real conversation with you on a site where that isn't fucking impossible due to "rate restrictions" for wrongthinkers. I really thought we could have gotten along, even after your second shithead reply that I tried to draw something constructive out of. EDIT EDIT: Who are you voting for, wannabee EE?
- lisivka 10y agohttps://en.wikipedia.org/wiki/Toyota_Production_System https://en.wikipedia.org/wiki/Toyota_Production_System https://en.wikipedia.org/wiki/The_Toyota_Way https://en.wikipedia.org/wiki/The_Toyota_Way Quote: Principle 3 Use "pull" systems to avoid overproduction. A method where a process signals its predecessor that more material is needed. The pull system produces only the required material after the subsequent operation signals a need for it. This process is necessary to reduce overproduction.
- notoothpaste 10y agoI too have heard of Kanban and JIT from my fellow arrogant valley douches. I would like to understand the specific manufacturing processes that make one-off products of production quality viable.
- lisivka 10y agoI suggest to read Gemba Kaizen books. Yes, it is hard to understand first, but then you realize that Toyota Way is like 3D printer — add only what is needed right now, do it fast, be precise. So yes, you are right — Toyota Way is not viable for mass production, but it perfect for areas where human labor is still plays major role in manufacturing, e.g. programming.
- yaakov34 10y agoIn most manufacturing, you have a prototype hall or floor where you have somewhat more general purpose/flexible machines with a lot of manual intervention to make small quantities of prototypes, and factories with automated machines set up to make the exact parts you need for your full production. This was always my experience in electronics - you, as the development engineer, set up small-scale production (going from prototypes to EV or engineering validation articles, which are basically the final product produced by these manual/slow methods), and then manufacturing engineers work with you to transfer your processes to an automated assembly line making who knows how many units a minute. It's not unusual to produce a special prototype in the small/experimental floor; I mean, Apple probably goes through hundreds (or whatever) of prototypes and test articles before releasing their next phone, and they are certainly not stopping their million-per-day manufacturing plants to make them. However, it does show impressive commitment to the customer on the part of Fujitsu. Also, electronics is more cyclical than cars (3-year-old model may be completely different and useless compared to the current one), so it is common to produce everything in batches rather than "the Toyota way" with just-in-time. In other words, if a laptop model is sold for 2 years, the whole run may have been made in 6 months, and then you have that manufacturing equipment sitting idle while the next prototype is worked on, so you may have equipment and engineers to spare. Only a few of the highest-volume factories (e.g. Apple again, I assume) run at full capacity all the time.
- notoothpaste 10y agoThank you for your sincere and informed response. I understand that EEs create countless prototypes over the course of the development of a product, and that development PCBs need not (especially for debugging purposes) bear any physical resemblance to the finished product. What is impressive to me is that Toshiba could: Redesign and test a PCB Set up a manufacturing process for pick and place etc Create an injection-molded case Put it all together Deliver all of this, on a whim, to a customer in the single digit quantities And apparently do so to similar standards as their mass-produced machines Did they just eat the cost of the most expensive PCB masks and injection molds, or is there something more interesting going on behind the scenes? That's what I want to know. EDIT: I tripped the (whatever the fuck random sequence of characters you need to bypass the filters) filter and now I can't post any more for a few hours, otherwise I'd happily call all of you out as the ignorant yuppie douchebags you are... no, worse, the 19 year old CS majors pretending to be ignorant adult yuppie douchebags. tl;dr I just wanted the chance to hear from experienced engineers. Please fuck off if you don't know what you're talking about, for the sake of anyone that wants to ask a remotely relevant question on this braindead hellhole.
- tluyben2 10y agoI had Fujitsu laptops from beginning of the 2000s until around 2009; the quality and support were amazing. You paid for it but man these things were good. Panasonic makes great laptops as well but these days it really does not warrent the high pricetag...
- kw71 10y agoI'd buy another Fujitsu if they had any current models with displays that are up to date. Seems someone there thinks that anyone who is using a portable doesn't need a display taller than 768 (or some other absurdly low number of) pixels.
- tluyben2 10y agoYes, for Fuljitsu that is a big reason; Panasonic has nice displays but they have insane prices. I was checking one of those (these [0] I think) in Tokyo and they are really nice; insanely long battery life, high res and generally very well built. But crazy prices. [0] http://panasonic.jp/pc/products/sz6e/ http://panasonic.jp/pc/products/sz6e/
- basch 10y agothe problem is, this merger collapsed. http://www.pcworld.com/article/3056030/computers/proposed-toshiba-fujitsu-vaio-pc-merger-is-reportedly-collapsing.html http://www.pcworld.com/article/3056030/computers/proposed-to... now Fujitsu is looking to be acquired by Lenovo http://www.japantimes.co.jp/news/2016/10/27/business/tech/fujitsu-pc-merger-talks-lenovo/ http://www.japantimes.co.jp/news/2016/10/27/business/tech/fu... and Toshiba is ending its consumer laptops entirely. http://www.techradar.com/news/mobile-computing/laptops/toshiba-we-re-stopping-making-consumer-laptops-1318014 http://www.techradar.com/news/mobile-computing/laptops/toshi... Toshiba Vaio would still make a good merger, one with sexy consumer laptops (the only PC laptop ever respected by Steve Jobs) and the other with functional utilitarian business laptops.
- mkaziz 10y agoI didn't realize Toshiba is stopping selling consumer laptops! Such sad news. :( I've exclusively bought Toshiba every since I got my first laptop way back when.
- Tepix 10y agoI've always wanted to buy one of those Fujitsu notebooks with displays that also worked in bright daylight. They were super expensive and I never saw one on eBay, however.
- ghaff 10y agoFor whatever reason, a number of Japanese companies were really driving the state-of-the-art for small laptops at on point. I also had one of the small Fujitsus and it was really nice for traveling at a time when even the more portable Thinkpads were fairly heavy and bulky in comparison. In a way, they were pre-Netbook Netbooks--although their processors and memory configurations were often closer to "regular" laptops than netbooks were.