4 ms·
> Lastly... Isn't VLSI so 80's? Isn't there a VLSIVLSI now or something? Maybe VLSI^2? The progress from discrete transistors to small-scale integration up thr
by wtallis 10y ago
> Lastly... Isn't VLSI so 80's? Isn't there a VLSIVLSI now or something? Maybe VLSI^2?
The progress from discrete transistors to small-scale integration up through VLSI brought with it major changes in what kind of functionality could be integrated on a single device. That's mostly stopped: early VLSI chips were things like CPUs, and our largest chips today are still usually just processors (or FPGAs) with a similar role in the system as a whole. We've integrated all the co-processors and much of the I/O onto SoCs that largely aren't pushing the limits of transistor count or die size, and there are some instances of bringing more analog stuff like some power regulation and radios onto the chip. But for the most part, we're still using separate chips for the processor and the RAM and a bunch of smaller chips for various I/O tasks, even on tiny embedded systems like smartphones.
- Someone 10y agoSmart-phones aren't "tiny embedded systems". Also, smaller embedded systems do have RAM and various I/O on-chip (but not necessarily on-die). To grab a random (not even really tiny) one, http://www.atmel.com/devices/ATSAMB11.aspx http://www.atmel.com/devices/ATSAMB11.aspx: "The SAM B11 is an ultra-low power Bluetooth® SMART (BLE 4.1) System on a Chip with Integrated MCU, Transceiver, Modem, MAC, PA, TR Switch, and Power Management Unit (PMU). It is a standalone ARM® Cortex®-M0 applications processor with embedded Flash memory and BLE connectivity." All in 6x6 mm.
- wtallis 10y agoSmartphones are tiny embedded systems in the sense that they are embedded systems, and their total circuit board area is a small multiple of the die size of their larger chips. They're physically quite space-constrained and don't have room for very many separate components, and the larger ones usually end up stacked.
- 100ideas 10y agoI thought one of Carver Mead's main motivations for developing VLSI with his students was that at the time, designing and fabbing a bespoke single silicon device (comprised of networks of many transistors) to implement a particular "program" was much harder than designing and building the same functionality from a "macro-network" of pre-existing, off-the-shelf, catalog transistor devices. I.e., it was easier to implement the logic for a traffic stop-light or an electronic calculator or a television remote-control by assembling a circuit from off-the-shelf components than it was to implement the same transistor logic in a single integrated circuit. It was definitely possible to do the latter in the early/mid 70's, but not as economical. Your comment points out that SoCs are the modern pinnacle of implementing everything "in silicon" - yet are we not also still implementing "the other half" of the system with circuits of many off-the-shelf ICs? I.e. one IC is CPU+Memorycache, another is RAM, a third is wifi module, etc.
- pjc50 10y ago> separate chips for the processor and the RAM They need slightly different silicon processing for maximum efficiency. http://electronics.stackexchange.com/questions/134585/precise-differences-between-dram-and-cmos-processes http://electronics.stackexchange.com/questions/134585/precis...