2 ms·
That's a good direction to pursue, but CWR (continuous welded rail) segments are only a few kilometers long at most. That, plus the fact that the cross-section
by lisper 10y ago
That's a good direction to pursue, but CWR (continuous welded rail) segments are only a few kilometers long at most. That, plus the fact that the cross-section of a rail is much less than the cross-section of a hyperloop tube, makes the tensile stress at the ends of the rail small enough that they can be managed by anchoring the ends of the rail to the rail bed.
The tensile stress at the ends of a hyperloop track would be orders of magnitude higher if you tried this approach. I haven't done the math, but I'd suspect you'd need an anchoring system comparable to what you see on large suspension bridge cables, if not more. Not only that, but I suspect you'd start to reach the limits of what steel can structurally sustain. With this solution, you've got a O(100km) long tube that is not only under vacuum but now also under enormous tension. Before this can be considered a viable solution someone needs to do the math on that, and AFAIK no one has.
So I still want my put options.