4 ms·
This is a 2-axis router it looks like; though if you used the recommended router, you could adjust the depth between runs.
by aidenn0 10y ago
This is a 2-axis router it looks like; though if you used the recommended router, you could adjust the depth between runs.
- jonah 10y agoTrue. Also, in the FAQ they say a z-axis is in the works.
- analog31 10y agoThe third axis is always the killer on any machine tool. The first two axes run in a shared plane, so it's easy to make it rigid. The third axis has to be supported by some sort of cantilever or frame, and stay out of the way of the workpiece, and thus is more complex. Also, if each axis has to carry the weight of the next axis, the overall design has to be stouter. This is the reason why the third axis is often separated from the first two, as in a typical knee or gantry mill.
- lostapathy 10y agoMost of the work done on CNC routers is 2-axis anyway. Or 2-axis with just a couple z-heights, which can be accommodated by changing the router depth by hand. Ultimately it's made to cut up plywood, not sculpt things. Like a sized-up version of small scale laser cutters. Once you accept the constraints of a 2-axis CNC router, you can design in a way that maximizes it and build incredible things. See https://www.opendesk.cc/ https://www.opendesk.cc/ for examples of a lot of furniture that can be built this way.
- jonah 10y agoThe project in this video on their Inspiration page is pretty neat: https://www.youtube.com/watch?v=gij49fF-4X0 https://www.youtube.com/watch?v=gij49fF-4X0
- aidenn0 10y agoOkay, that makes sense; this is for replacing a woodworker with a jigsaw, not for fine work. Seems like a really good solution in this space (though I'm biased, since I suck with a jigsaw).