3 ms·
Ironically, the PCB would probably take less effort than doing all of the switches and key caps yourself. A simple matrix keyboard (downside: will misdetect ce
by vidarh 10y ago
Ironically, the PCB would probably take less effort than doing all of the switches and key caps yourself.
A simple matrix keyboard (downside: will misdetect certain keyboard combinations) requires a quite small set of io pins (if you insist on fully individual switches it'll complicate matters a bit, but not that much) that you could make a controller for with any number of simple old parts that are big enough that etching your own PCB for them at home is fairly straightforward.
For that matter good old 8-bit era parts like 8526/6526 CIA's (IO) and a 6510/8510 CPU are big enough and resilient enough (and still easy to get hold of) that you can build a controller on a breadboard, or even mount them on cardboard you punch holes in (... yes, been there, done that), and you can drive a serial port off them (in fact, the Amiga 500 and Amiga 2000 keyboards at the very least used a SOC version of the 6502 with onboard PROM and RAM for their keyboard controller)
Of course, going the "next step down" and building it all from transistors starts getting a bit more hairy.
- eichin 10y agoFor that "next step down" dig up Don Lancaster's "TV Typewriter Cookbook" for the 1976 version of this (and to understand "shift" and "control" at a more visceral level :-)