3 ms·
This is where the "computer" should be replaced by the "appliance". Simple raspberry machines in rugged enclosures running ONE piece of simple software off flas
by alkonaut 10y ago
This is where the "computer" should be replaced by the "appliance". Simple raspberry machines in rugged enclosures running ONE piece of simple software off flash cards. If it breaks it's a matter of either just inserting the backup flash card (because the old one died) or worse case replacing the raspberry inside the box. Either way it's dirt cheap.
The shop can easily be given 3 raspberries and a dozen flashcards when the system is first installed, for almost no money. Even if the software vendor is out of business when it breaks in 10 years, they are good to go in no time at all. Any auto mechanic can swap the raspberry inside the case in 10 minutes and be up and running again.
- RottenHuman 10y agoDon't you run into limitations of raspberry's real time capabilities with a task like this? A REAL, microcontroller based, appliance, which is connected through a serial port to any PC, would be more suitable.
- alkonaut 10y agoYeah it depends on the task in question but I was thinking in general- Appliances should look and work as such. The most important thing though is getting rid of the PC where it isn't necessary and making the whole thing an appliance. Otherwise the PC will be the weakest link in the system. It can be replaced but it's expensive and cumbersome (updates, security, etc) if all you want is the appliance for balancing axles. I doubt there are any difficult hardware requirements for a task like this, if it's like balancing wheels it's no harder than (slow) analog sampling. I have done it with a cheap analog io card on a 386 with DOS for regular auto shop balancing.