5 ms·
Ghost Robotics' Minitaur Quadruped Conquers Stairs, Doors, Fences
- _Adam 10y agoThis is super cool. What motor does it use? I didn't know such a small, torquey direct drive actuator existed!
- ziikutv 10y agoThey use direct-drive electric motors. Those are motors that you typically see on washing machines. They have super high torque but low speed which works in their use case.
- eggy 10y agoThe door opening and fence climbing sequence were impressive. Did onboard video, CV and CPU result in being able to do the acrobatics trajectory to hit the door handle, or was it human operator driven?
- sohkamyung 10y agoI believe it was all onboard, not human operator driven. In the article, Kenneally describes how the robot opens the door and says this: Once it perceives contact with the door knob, it retracts the leg, moves it over a little bit, and then extends it, and that actually all happens within 50 milliseconds, so it’s incredibly fast.
- eggy 10y agoThanks! I'll give it a closer read later. Impressive in any case.
- jotux 10y agoReminds me of this robot from a researcher at McGill: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.61.8511&rep=rep1&type=pdf http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.61.... https://www.youtube.com/watch?v=KW5FR3rmI4w https://www.youtube.com/watch?v=KW5FR3rmI4w
- Animats 10y agoThat's where Boston Dynamics got their legged locomotion technology. They hired the professor at McGill, Dr. Martin Buehler, who was in charge of that project.
- ChuckMcM 10y agoThat is super awesome and even more awesome when I read that those are direct drive motors. All the compliance is done in software. This is something I must spend some time playing with. That advent of these small brushless motors with insane amounts of torque makes all sort of things possible that weren't before.
- Animats 10y agoIt's the direct drive motors that make it work. As someone from GE said a century ago, "You can't strip the teeth of a magnetic field". Direct drive robot arms have been built; Adept SCARA arms were direct drive. But they used to be too heavy for mobile robots. What makes direct drive motors work are today's really good power FETs. You can do things with FETs, capacitors, and switching power supplies to get whatever voltage and current you need, at least briefly. Motors can be overloaded by huge amounts if you monitor the temperature, and you can build up a charge in supercapacitors for the next time you need to hit the motor really hard. Putting a computer in charge of a power supply is normal today, and may even reduce the parts count. This, and Schaft, probably spells the end of Boston Dynamics' hydraulic monsters. That approach is just too bulky for anything below mule size.
- Torkel 10y agoIt's the magnets too - the NIB rare earth magnets enable permanent magnet motors that are much more efficient than before. I wish someone would make some linear ones...
- Animats 10y agoLinear motors are a lousy business. They're almost all custom, while rotary motors are standardized. Prices seem to start around 10x the price of a comparable rotary motor. Find a market for a million identical ones and the price will come way down. Some nice linear motors.[1] Even used on eBay, they're expensive. [1] http://www.linmot.com/products/linear-motors/ http://www.linmot.com/products/linear-motors/
- bigiain 10y ago
- tlb 10y agoImpressive to make it work with direct-drive actuators. The previous lowest gear ratio I know about was the MIT Cheetah, at 5.8:1. Detailed comparative analysis at http://biomimetics.mit.edu/research/optimal-actuator-design http://biomimetics.mit.edu/research/optimal-actuator-design
- scotty79 10y agoI'm quite amazed that using springs in robots is sort of a new thing. I was thinking about making amateur robot with two wiper motors, in-parallel, through strings, per joint. Wiper motors seem to me to be pretty fast and strong (and cheap), and use worm gear so they could hold the springs tensed without using energy proportional to tension. Keyword: "variable stiffness joint" http://www.mdpi.com/actuators/actuators-03-00270/article_deploy/html/images/actuators-03-00270-g002-1024.png http://www.mdpi.com/actuators/actuators-03-00270/article_dep...
- acupofnope 10y agoSurely I'm not the only one who thinks this robot looks like a very happy little goat? :-)
- ansible 10y agoLess parts, more smarts. I love this design.
- JoeAltmaier 10y agoSome thoughts: Looks too cute. Only two legs away from being a giant spider. Bouncing around like that, it may not be a very useful robot. Won't be carrying my drinks for instance. Or taking non-blurry pictures of anything.
- brak2718 10y agoA similar concept -- variable compliance -- that's been around for a while is called series elastic actuators. With geared motors you think in terms of position and speed. With direct drive or series elastic you are instead controlling torque.
- unhelpful 10y agoIt runs just like loca https://www.youtube.com/watch?v=x2RJN9a_jdM https://www.youtube.com/watch?v=x2RJN9a_jdM