3 ms·
It isn't really that terrible an idea for the owner of the bridge to allow vehicles across that will only fit in the center lanes. They just need to make sure
by maxerickson 10y ago
It isn't really that terrible an idea for the owner of the bridge to allow vehicles across that will only fit in the center lanes.
They just need to make sure that the drivers understand that the height limit is lower in the outer lanes.
- revelation 10y agomake sure that the drivers understand Yeah, right. https://www.youtube.com/c/yovo68 https://www.youtube.com/c/yovo68
- ars 10y agoThat sign is horrible! It's like it was designed to be utterly useless. "Overheight must turn" means to virtually all "IF you are Overheight you must turn". Obviously that driver doesn't think he is overheight. Change it to "Warning: Overheight truck detected in this lane" (with proper lights/arrows pointing to lane). And blink red as well.
- vt240 10y agoI wonder if they focus grouped the signage ? To me it seemed clear, but now that you point it out... I see where the confusion could happen!
- ars 10y agoThe positioning of the sign doesn't help - so high up. Who looks up that high when driving? The truck driver doesn't realize the sign is only on when he is there, he never sees it when it's off, he has no idea it's illuminated specially for him. This is government saying "We did something", while doing nothing.
- Symbiote 10y agoEveryone looks that high, because the traffic lights are there.
- ars 10y agoNo, people glance up high to look at a color, and that's about it. And this sign is above even the traffic lights. Even someone glancing at the colors would not see this. What they should do is lower the sign to the height of the bridge - so people hit the sign (or something dangling from it). But that would require government admitting that people hitting the bridge is their fault, and not stupid drivers.
- maxerickson 10y agoWashington publishes locations with low clearance: http://www.wsdot.wa.gov/data/tools/bridgeclearance/ http://www.wsdot.wa.gov/data/tools/bridgeclearance/ Someone driving an oversize load can reasonably be expected to check their route for clearance. It's not the same situation as some guy trying to find Taco Bell in his RV.
- sverige 10y agoI-25 in Denver near 20th St. and 23rd Ave. has clear indications painted on the bridges and the signage before the bridges indicating lower clearance on the shoulders. It's not that hard to do. NYC takes the cake for inaccurate bridge height signs, though. Some bridges have signs indicating 12'9" or lower clearance when standard 13'6" trucks can clear them easily. It's a complete mystery why they can't mark them correctly. It's been this way for decades (literally).
- tombrossman 10y agoI got burned by this in upstate New York and it caused an unnecessarily long delay. I was following the directions provided by the customer and came across a 12'6" marked bridge towing a 13'6" trailer on a narrow two-lane highway. I stopped, obviously, and had to ring the highway patrol for help. Traffic behind me was stuck waiting and this low clearance bridge was not properly marked in the trucker atlas and (if it had truly been 12'6") not up to spec for a state highway overpass. I'd done my due diligence so this was the highway patrol or customer's problem to sort out. About an hour and a half later, we established that the road had been recently re-paved and no one was exactly sure what the height was. Backing up to the nearest intersection was not an option because there were none close by and turning the tractor-trailer around was impossible. The cops were cool about it and suggested that I creep forward very slowly and see if I'd fit. I was able to do this and stop just as the trailer reached the bridge. I got out of the cab and climbed up behind the tractor to have a peek and had about an inch to spare. I went for it, very slowly, and made it under. No fun but I did get a cool photo as a memento: http://i.imgur.com/64uYu2z.jpg http://i.imgur.com/64uYu2z.jpg I took a different route on the way back of course!
- caf 10y agoWould it have helped to deflate the tyres on the trailer a bit?
- tombrossman 10y agoNo, this is not practical and you risk damaging the tires. It is possible to deflate the air ride suspension for the tractor drive axles to drop a few inches (useful for backing under a new trailer when the nose is low) but I did not do this because the rear of the trailer would still be too high.