4 ms·
This is not the first 48v debate. Several years ago is came and went over the desire for electric brakes, solenoids rather than hydraulic calipers. They would
by sandworm101 10y ago
This is not the first 48v debate. Several years ago is came and went over the desire for electric brakes, solenoids rather than hydraulic calipers. They would theoretically be cheaper and simpler to manage electronically. 48v or higher would be needed for such things (also for running AC pumps). But brakes are very established and mature tech. They are also the primary safety system. Antilocks work well enough as is. Manufacturers balked at the idea of starting from scratch with purely electric brakes. With the need for higher voltages mooted, the debate came and went.
Anyone worried about hacking cars, imagine the nightmare should brakes be completely electric, with no hydraulic or mechanical option should either the power or control system fail.
As for saving weight on cables, smaller metal doesn't mean smaller cables. Higher voltage would require greater shielding, thicker cables. The increased risk of sparks/shorts would also be a thing, as would the risk of electrocuting those working on their cars. With 12v you can get away with stuff that at 48v might put you in hospital.
- ollie87 10y agoSurely any electric brake would fail closed? Just like air-brakes on large trucks. That would make them safer right?
- cmdrfred 10y agoAs long as actually fails yes, if the switch on the break pedal fails open for example you'd be in a world of hurt. I see where mistakes being made.
- bigtech 10y agoThey don't have to be perfect -- they just have to fail less often than current technology.
- deleted 10y ago[deleted]
- peterwwillis 10y agoOnly truck brakes are designed to fail closed. Passenger vehicles aren't, even though they could be. In fact, there's a lot of safety systems that passenger cars don't have, for no discernible reason. There's no warning light for the brake fluid reservoir or pressure, even though it would be trivial to add. The oil warning light for passenger vehicles is so useless, when it comes on you have to stop your vehicle immediately. Gasoline gauges are designed to trick people into thinking they're on empty and then provide an extra gallon or two, even though they could actually design the gauge to display average miles based on the rated mileage of the car and size of the tank. Transmission, diff, brake, and engine oil fluids could be measured or at least timed for when they need to be replaced and a warning given to the user that it's time to maintain it. Only in modern [usually expensive] cars do you find tire air pressure sensors. Why don't we have these basic maintenance and safety systems built into cars? Too expensive? Too technically challenging? Nope - they want you to bring your car into the dealer regularly to regularly charge you for maintenance you may not need.
- MertsA 10y ago>There's no warning light for the brake fluid reservoir or pressure, even though it would be trivial to add. What deathtrap are you driving? This is a common thing. Even my old 96 Camry has it.
- peterwwillis 10y agoHmm. Well it seems like it's possible the cars i've had have shared the same indicator for multiple brake notifications. But i've not noticed a dedicated light for brake fluid. There's one for the e-brake engagement, and one for ABS, for no particular reason, because it's a non-critical brake feature.... but i've not seen a dedicated brake pressure light.
- sandworm101 10y agoSometimes they are linked to other systems. My 92 bmw shared the brake fluid reservoir with the clutch. A leak in the clutch triggered the brake warning light.
- sandworm101 10y agoNot on passenger cars. The fail-closed thing is only done on larger vehicles. There is a reason. Fail-on systems have a max applicable force. Basically, they are some sort of spring pushing the brakes on 24/7 and the control system fights against this spring. So when the system fails, the brakes default on. But that means that stamping on the brake pedal harder and harder doesn't translate into greater braking force. The spring sets the max force. That is OK on a truck or train where human muscle is irrelevant, but in a passenger car or motorcycle human muscle is more than enough to lock up the tires (ie go beyond maximum braking potential). Large vehicles also do not have the same performance envelope and so can generally survive a braking system that suddenly fails "on". A truck+trailer can lock its trailer brakes without, normally, going out of control. So too with a train or even an aircraft on landing. If that happened on a motorcycle, the rider would die. No questions, just death. Cars are somewhere in the middle. Some cars could survive but many would become instantly uncontrollable. (Remember there are limitations on antilocks in no-power situations. They cannot antilock forever and so will eventually lock up.)
- elbrownos 10y agoIf you can put yourself in hospital with 48V then you deserve a Darwin award
- MertsA 10y agoWith 48v and several hundred amps behind it, that's not a hard thing to do. You won't shock yourself with 48v, but when working with DC batteries that can source those kind of currents, you need to be very careful. If you cause a short upstream of a fuse that is a very dangerous thing. Even with just 12v automotive batteries people get hurt from time to time by accidentally shorting them.
- 2sk21 10y agoIn the Prius, most of the accessories including the air-conditioning compressor are electrically driven from the traction battery so your proposal can easily be made to work.
- Grishnakh 10y agoI can't imagine how electric brakes could be cheaper than hydraulic calipers. Existing brake calipers are dirt cheap. Now, when you add the cost of the ABS/TC/DSC system module, maybe it works out better, I dunno, but the amount of copper you'd need in 4 separate electric brake motors would be pretty high, so I don't see how they'd be cheap. The real advantages for a 48V system are weight and size of existing electric systems. Modern cars have a lot of motors, including now the power steering system (run by a motor attached to the steering shaft). These can all be downsized with higher voltage, saving copper ($$$) and weight. There's also smaller motors in the car, like those in the seats, and in luxury cars there's all kinds of motors (for opening and closing doors and liftgates, adjusting the steering, etc.). Finally, the wiring weight can be reduced all over the car, as well as the wiring cost (since again, copper is very expensive). Your statement about shielding is BS: yes, higher-voltage wire needs thicker insulation, but not that much going from 12V to only 48V, and insulation jackets weigh very little compared to the copper inside them. Furthermore, with a reduced diameter of the copper conductor, the diameter of the insulation will also decrease, so the insulation weight will probably be the same, if not a bit less. Besides, I'm pretty sure most wiring used on cars these days can handle hundreds of volts, and is sized not for electrical insulation properties, but instead mechanical properties (they make it thicker and tougher to handle being handled during assembly and repair, and also so it doesn't get worn through from vibration over the car's lifetime). If they actually sized wire insulation for only 12V, the wires in cars would barely have any insulation on them at all.