4 ms·
It's not quite 19th c. technology. It was .25 inches, but it had only two conductors, the tip, and the ring, separated by an insulator. Hence the "tip" and "rin
by Zigurd 10y ago
It's not quite 19th c. technology. It was .25 inches, but it had only two conductors, the tip, and the ring, separated by an insulator. Hence the "tip" and "ring" nomenclature for analog telephone wiring. Analog phone technology is remarkably back-compatible. You can use an 80 year old phone today. Not many, if any technology products could claim that level of compatibility.
But, so what? Analog phones are going away. They just lasted longer than most other technologies. So should codecs and amps inside of mobile devices. Those things belong with the transducer, so they can be tuned to the characteristics of the transducer.
- Animats 10y agoThe original 1/4" phone plug for switchboard use had a ball tip, rather than a pointed one. It's almost compatible with modern 1/4" jacks, but the proper jack is a "long frame telephone jack". I use those with antique Teletype machines. Unlike 1/4" audio jacks, the ring is not a ground, and the shell is always insulated.
- c22 10y ago> You can use an 80 year old phone today. I think it depends on where you are. A lot of lecs only take dtmf signalling these days.
- iliis 10y agoOne of the most backwards compatible technology I know of is railway signaling infrastructure - altough it's not a consumer product like a telephone: There are still fully mechanical control centres where you have to switch the switches by hand and turn a crank (to generate a bit of AC) to signal another control centre the current state of your tracks. Doesn't matter if the next station uses relais-logic or computers, it works.
- Sanddancer 10y agoSpeaking of railways, and connectors, the railway couplings in the US are another thing that's withstood the dest of time. The Janney railway coupler is compatible with couplers built 100+ years ago, and of a design dating back to the 1860s, with the refinements pretty much all been making individual components more and more standardized.
- paulmd 10y ago> So should codecs and amps inside of mobile devices. Those things belong with the transducer, so they can be tuned to the characteristics of the transducer. Amplifiers/DACs are not simple devices that can be crammed into a pair of headphones without significant compromises in audio quality. The DAC in an iPhone is acceptable for most uses but an amplifier requires a fairly large quantity of discretes and a large power source to drive many headphones. Here are some pictures of the inside of a minimalist audiophile headphone amplifier (Objective2), and with the DAC daughterboard added: http://teribil-audio.com/wp-content/uploads/2012/07/D300-7668.jpg http://teribil-audio.com/wp-content/uploads/2012/07/D300-766... http://4.bp.blogspot.com/-9lKWLE_sO84/UDUDtC2ApHI/AAAAAAAABBE/o4S-OE3j1HM/s1600/DSC_0549.JPG http://4.bp.blogspot.com/-9lKWLE_sO84/UDUDtC2ApHI/AAAAAAAABB... Furthermore, if the DAC/amp are internal to the headphones then the headphones themselves become significantly more expensive. For high-end usage most users will want to use their DAC/amp with multiple pairs of headphones, it's cost-ineffective to have a $200 DAC/amp unit built in to every single pair of headphones. Consumer gear is also cheaper, but you're still talking about the difference between a pair of headphones costing $30 and costing $50. Also, there's not really any consensus on what "proper tuning" actually means with headphones. Some people like an absolutely flat "reference/analytical" sound, but this is only a small subset of high-end users, and consumer gear is not tuned anywhere near a flat response curve. And it's a highly perception-based area where different individuals hear totally different aspects of headphones, with a high degree of placebo effect. The long-term fix for audiophile users is probably going to be to move to external DAC/amp units rather than integrating the DAC/amp into the headphones. This means yet another thing you have to carry around and keep charged (my Fiio X5ii lasts maybe 6-8h on a charge). I'm not currently aware of any that use Lightning, but if there's a market they will eventually exist. Consumer users probably won't care about the negative impacts on quality too much, but rather about how Lightning headsets are now going to be quite a bit more expensive.
- Zigurd 10y ago> crammed into a pair of headphones Headphones have a lot more room for electronics and than do phones. Even a small volume-control module in line in an in-ear headphones would have a lot more room than is currently used by the audio circuitry in a phone. > The long-term fix for audiophile users is probably going to be to move to external DAC/amp units That's the current solution for audiophiles, and digital music connections, wired or wireless, will support this better.