11 ms·
Police asked 3D printing lab to recreate a dead man’s fingers to unlock phone
- dang 10y agoUrl changed from http://www.theverge.com/2016/7/21/12247370/police-fingerprint-3D-printing-unlock-phone-murder http://www.theverge.com/2016/7/21/12247370/police-fingerprin..., which points to this. Submitters: please submit original sources, especially when there's an obvious one. This is in the HN guidelines (https://news.ycombinator.com/newsguidelines.html https://news.ycombinator.com/newsguidelines.html).
- klodolph 10y agoI was under the impression that a 3D print was overkill, that you could do this much more easily. Have the sensors gotten that much better?
- TrevorJ 10y agoI doubt very much that you could do it with a 3d print at all. Even direct casts from fingerprints have proved difficult to use to defeat the scanner. I don't think a 3d print would have the necessary resolution.
- jotux 10y ago>I don't think a 3d print would have the necessary resolution. I bought and run a Projet 3500(http://www.3dsystems.com/3d-printers/professional/projet-3500-hdmax http://www.3dsystems.com/3d-printers/professional/projet-350...) at my day job. In the highest resolution mode, which is all we really use, it's 750x750x1600 DPI. You could definitely print an accurate finger with fingerprints on it.
- palunon 10y agoYou can almost 3d print at the atom level with the right kind of machinery... Some FDM printers apparently have resolutions in the low 10s of microns. This laboratory probably isn't using off-the-shelf consumer-grade 3d printer
- tantalor 10y agoIt's overkill by a whole dimension; fingerprints are 2D.
- justusthane 10y agoNo it's not overkill, and no, fingerprints are not 2D. The fingerprint scanners on iPhones (and I believe other phones as well) are capacitive, meaning they rely on the physical ridges in your fingerprint.
- tantalor 10y agoFingerprints aren't 2D, but the sensor is. The sensor does not directly measure the height of the epidermal ridges. Rather, the varying thickness of the epidermic vary the dielectric between the conductive dermis and sensor. So you can replace the ridges with something completely 2 dimensional but with the same dialectic pattern. A normal home printer ought to be able to do that.
- FireBeyond 10y agoOught to and can: http://qz.com/631697/a-regular-inkjet-printer-can-spoof-a-fingerprint-and-unlock-a-phone-in-under-15-minutes/ http://qz.com/631697/a-regular-inkjet-printer-can-spoof-a-fi...
- Godel_unicode 10y agoFrom the link: "The spoof worked on the Samsung and Huawei handsets, but not the Apple and Meizu ones"
- lawl 10y agoindeed the iphone fingerprint does check if the objects are capacitive though, but that's a separate check. the "scan" is still just iirc. a infrared 2d cam cough graphite powder cough
- 7Z7 10y ago
- 1ris 10y agoIt's not only overkill, it probably doesn't work because the resolution is typically way to big. http://qz.com/631697/a-regular-inkjet-printer-can-spoof-a-fingerprint-and-unlock-a-phone-in-under-15-minutes/ http://qz.com/631697/a-regular-inkjet-printer-can-spoof-a-fi...
- yincrash 10y agoIt should be noted that these are the same researchers in both articles. I would guess that the inkjet method didn't work otherwise they are just ripping off the police department?
- russdill 10y agoOne way I've seen it done is to create a PCB with heavy copper, and then use that to cast gelatin or some other skin analog. http://torkjel.com/projects/attacking_fingerprint_sensors.pdf http://torkjel.com/projects/attacking_fingerprint_sensors.pd... Creating PCBs can be with very short turn around times or even in house.
- tdy721 10y agoI agree. Just mold and cast the finger. A bigger question is, why do they need the fingerprint... The phone has a passcode too.
- tlrobinson 10y agoWhy kind of phone is this? I believe iPhones don't allow unlocking with TouchID after 24 hours of inactivity, presumably for this reason...
- mikeash 10y agoCould just be that the police don't know this, and they'll get a rude surprise when they go and try it. Not that it's important, but I believe it's 48 hours, and 8 hours if you haven't entered your passcode in the last six days. You also only get five tries, so a finger that is sometimes recognized but not with great reliability would still probably fail.
- wlesieutre 10y agoCorrect, rules outlined here: http://www.macworld.com/article/3072181/ios/new-touch-id-rules-why-you-have-to-enter-your-passcode-when-you-wake-up.html http://www.macworld.com/article/3072181/ios/new-touch-id-rul... • Not unlocked for 8 hours after not having used passcode for 6 days • Not unlocked for 48 hours otherwise • Restarted • 5 failed fingerprints • Enrolling new fingerprints
- socceroos 10y agoWell, does the OS or the fingerprint TPM handle the timeout? If the OS handles it (and potentially if the OS files themselves aren't completely and fully encrypted) then you can trick the OS into thinking it hasn't been 24-48 hours - all you need is for the fingerprint TPM to keep returning 'success'. If the TPM handles it then it is slightly harder to do.
- russjr08 10y agoIIRC the Secure Enclave handles it.
- shostack 10y agoImportant to note as well that the fingerprint sensor unlock is not protected by the 5th amendment like passwords are. [1] [1]http://www.theatlantic.com/technology/archive/2016/05/iphone-fingerprint-search-warrant/480861/ http://www.theatlantic.com/technology/archive/2016/05/iphone...
- sickbeard 10y agoPolice asked locksmith to recreate a dead man's key to unlock house.
- scrollaway 10y agoMaybe if the key was the dead man's finger, and the house contained swathes of the dead man's private life including correspondances, photos, friends/family, all analyzable in mere seconds. Come to think of it: Police asks 3D printing lab to recreate a dead man's fingers to unlock phone.
- hueving 10y ago>and the house contained swathes of the dead man's private life including correspondances, photos, friends/family, Based on the tone of your comment, it seemed that you implied that these wouldn't be in someone's house? They certainly would be for many people I know...
- scrollaway 10y agoSwathes? Maybe not a strong enough word. Do an inventory and compare it to what's in your phone. Even amongst the least technical people I know, some of them have thousands of emails, their facebook correspondances are filled with personal details, their SMS/chat history is a perfectly timestamped history of their past few years, etc. Yeah there's a few hundred, or even maybe thousands of photos in my mother's house. I'm sure there's a lot of unread magazines, too. All of that, accumulated over decades. I think it's still a safe bet there is more data in her phone would than in the combined homes of the entire neighbourhood.
- scigeek42 10y agoI have to ask the morbid question, why couldn't they use the dead man's fingers directly?
- CHaro 10y agoMy complete guess based is that the body is either already cremated, or in the hands of the family of the deceased. And they wouldn't exactly be jumping at the opportunity to let the police mess with their dead relative.
- justinlardinois 10y agoAnd they probably want something they could reliably continue to unlock the phone with. Sure, they could just remove all authentication once they're in, but maybe they want to tamper with the phone and its settings as little as possible.
- weaksauce 10y agoI don't think you can make any changes to the security setting unless you know the passcode.
- justinlardinois 10y agoQuite possibly. I don't think the article mentioned what kind of phone it is.
- iaw 10y agoI suspect deformation due to decomposition. Without doing any research I'd say that the decomposition process may rapidly change finger prints enough to no longer be recognized. Alternatively, and possibly more likely, as a murder victim there's any number of ways his fingerprints could have been obliterated.
- Eric_WVGG 10y agoIn addition to the capacitive sensor, there's an RF sensor that apparently responds to living tissue, but not dead tissue. http://fortune.com/2013/09/16/apple-touch-id-and-the-fear-having-your-finger-chopped-off/ http://fortune.com/2013/09/16/apple-touch-id-and-the-fear-ha... I imagine there are some Frankensteinian ways to create the necessary current to activate the RF sensor, but… well, Frankenstein
- justinlardinois 10y agoJust a reminder that fingerprints are not passwords.
- SilasX 10y agoWell, I prefer to think of it as "passwords with a narrower threat model". They protect against randos at a party, petty thieves, and even close friends from getting into your data, but not well-funded governments or people willing to cut off your hand. That may be a good enough for your use case, esp since you don't have to remember it.
- theandrewbailey 10y agoLikewise, neither is DNA. We leave both of them everywhere.
- mikeash 10y agoThank you very much for saying that without the "they are usernames" that usually accompanies it. Fingerprints are something different from either, with their own properties, and trying to shoehorn them into the existing username/password system means you'll get things wrong.
- kirykl 10y agoI'd like to see brainwaves being used as passwords. And the fun accompanying the government forcing suspects to think "unlock"
- jessedhillon 10y agoPretty sure a simple suggestion of "don't think of an open lock" would do the trick. Or showing an animation of a lock opening. Even if the required image isn't of a lock, but of a "password image," the suggestion of "don't think of your password image" will probably conjure it up for most.
- lettergram 10y agoYou'd need one hell of an accurate EEG in similar conditions to do this consistently. That being said, give it a couple decades
- leggomylibro 10y agoYou can detect strong signals with current consumer technology. One easy pattern is the SSVEP[1], which shows up as a spike in the brain signal's FFT at the frequency of a flashing light that the subject is looking at. Interestingly, it also seems to work with binaural audio. It might be hard to tell peoples' signals apart with the confidence of a strong password, but individuals do respond pretty differently in terms of how long it takes to appear, how quickly it grows, how much of a spike is observed, small offsets, etc. [1] https://en.wikipedia.org/wiki/Steady_state_visually_evoked_potential https://en.wikipedia.org/wiki/Steady_state_visually_evoked_p...
- lettergram 10y agoYeah, SSVEP has it's uses[1], but I don't think it would work well enough to identify various users with any sort of confidence. It would likely be easier to do with showing an image (or series of such) that would present people with a very different emotional responses. This could be loved ones, childhood homes, etc. If you are curious in this stuff, I am pretty familiar with this stuff, and my startup[2] uses consumer EEG's regularly. Our single largest concern is actually signal correction due to movement / other environment factors[3]. [1] http://synaptitude.me/blog/a-quick-intro-to-ssvep-steady-state-visually-evoked-potential/ http://synaptitude.me/blog/a-quick-intro-to-ssvep-steady-sta... [2]http://synaptitude.me/ http://synaptitude.me/ [3] http://synaptitude.me/blog/using-computer-vision-to-improve-eeg-signals/ http://synaptitude.me/blog/using-computer-vision-to-improve-...
- trjordan 10y agoPrivacy expires at death. http://www.nytimes.com/2001/11/26/opinion/l-privacy-after-death-341860.html http://www.nytimes.com/2001/11/26/opinion/l-privacy-after-de... If you want to take something to the grave, you'll have to be more creative than simply assuming nobody is going to go through your stuff when you die.
- mey 10y agoDeadman's switch attached to a thermite pile?
- cmdrfred 10y agoOr you know a password that isn't written down and strong encryption.
- evv 10y agoStrong encryption when you die is weak encryption a few years later. Thermite is the way to go
- Frenchgeek 10y agoAnd a written down "password".
- jachee 10y agoMC Frontalot said this well here: http://frontalot.com/index.php/?page=lyrics&lyricid=41 http://frontalot.com/index.php/?page=lyrics&lyricid=41.
- Something1234 10y agoThat's just not permanent or fail-deadly, maybe something like HCl over your documents on death. The thermite might get spread around or fail to ignite.
- zapu 10y agohttps://www.youtube.com/watch?v=-bpX8YvNg6Y https://www.youtube.com/watch?v=-bpX8YvNg6Y Might be harder than it looks/sounds.
- delinka 10y agoWouldn't this[1] be easier? If they have the print on file, I can't imagine why they'd need to go all 3D-printer-happy. http://www.extremetech.com/computing/51228-gummy-fingers-fool-fingerprint-readers http://www.extremetech.com/computing/51228-gummy-fingers-foo...
- cloudjacker 10y agoGot a high school dropout trying to play McNulty and be clever oh well
- downandout 10y agoThis seems very problematic, since of course going forward they'll be doing this with live suspects. Police stations and other law enforcement agencies are known locations. It wouldn't that be hard to write an app that has a database of GPS coordinates for these locations and puts the phone in passcode required mode the moment the phone enters one of these zones.
- realo 10y agothis is an awesome idea, but the other way around... only allow fingerprint in white listed locations.
- downandout 10y agoEven better - great idea!
- deleted 10y ago[deleted]
- NathanKP 10y agoFingerprints should not be considered to be a password. They are a username. You can't rotate your fingerprints like you can rotate a password, and what is more you leave your fingerprints on everything you touch.
- LastZactionHero 10y agoYup. If I look at my phone right light, I can see the key to unlock the phone on the glass.
- sleepychu 10y agoThough since you know the shape you'd have to get someone else to try unless it's really clear.
- pizza 10y ago1. Place phone on scanner-bed 2. Open mirror image of fingerprint in photoshop and maximize contrast, crop to fingerprint alone 3. Print finger print mirror image to UV-stencil-type material 4. Etch into UV-material w/ UV printer 5. Pour rubber/plastic-type material over UV etching 6. Remove rubber thumb, apply to fingerprint detector, voila..
- heartsucker 10y agoCyanogenmod has a feature that lets you randomize the numbers on the keyboard each time you try to unlock it, if you use a PIN.
- davidhariri 10y agoImportant privacy matters aside, would this even work? I didn't realize that 3D printing had improved to the resolution of a fingerprint.
- JustSomeNobody 10y ago> ... and the police think there might be clues to who murdered him stored in his phone. I am always skeptical of these kinds of statements.
- sandworm101 10y agoQuestion: Can we trust that the person is dead? The police aren't providing the dead man's fingers, just a fingerprint scan. Without more, I have to admit the possibility that the police aren't telling the truth, that this is an attempt to unlock a live person's phone. If the person was in custody then there would be no need. They can force his finger onto the phone. Perhaps they have the phone but not the man?
- whats_crap 10y agoChrist almighty. That fucking website's moble responsive bullshit is intolerable. Stupid shitty buttons need to fuck off permanently, please! No, I'm not going to be emailing anything. No, I am not going to tweet your shit. No, I am not going to facebook your shit. No, I am not going to fucking whatsapp whatever the fuck that even means. But wow, can I fucking READ the fucking website? No! Because all the fucking shitty useless buttons are in the fucking way, so I can't even SCROLL THE FUCKING PAGE WHETHER IT'S FUCKING PORTRAIT OR LANDSCAPE. GOD WHAT THE FUCK IS THE PROBLEM WITH YOU PEOPLE???
- deleted 10y ago[deleted]
- dang 10y agoPlease don't do this here.
- jeffbush 10y agoWorth noting that Mythbusters did an experiment with spoofing fingerprint scanners. They didn't use a 3D printer, but etched a copper plate. It looks like the fingerprint reader technology is not the same, but it seems like the ballistics gel version they made might have similar capacitance to a human finger and could work. https://www.youtube.com/watch?v=3Hji3kp_i9k https://www.youtube.com/watch?v=3Hji3kp_i9k tldw: http://www.discovery.com/tv-shows/mythbusters/mythbusters-database/fingerprint-scanners-unbeatable/ http://www.discovery.com/tv-shows/mythbusters/mythbusters-da...
- tdy721 10y agoIIRC, they also had success on some readers with just a photocopy of a dusted print, with a warm/conductive finger behind the paper.
- urbanarson 10y agoThis was several years ago when fingerprint scanners were cameras under glass, they are a lot more sophisticated now and harder to fool. These techniques will get you no where on a current Apple device.
- DonHopkins 10y agoReminds me of the story about the 3D copier that somebody 3D copied, but they had their thumb on the scanner when they copied it, so all descendent copies of that 3d copier had a copy of their thumb on the scanner.
- gourou 10y agogot a link for this absurd story?
- restlessmedia 10y agoSounds like a new Pirates of the Caribbean film. "Pirates of the Caribbean: Dead man's fingers"