3 ms·
All of these challenges you've described are why Facebook's drone group also has a team working on 60/70/80 GHz PTP millimeter wave radio tech. Not very dissimi
by walrus01 10y ago
All of these challenges you've described are why Facebook's drone group also has a team working on 60/70/80 GHz PTP millimeter wave radio tech. Not very dissimilar from existing high-capacity 1GbE 60/70/80 GHz bridge radio products on the market now, from a radio perspective (example, one polarity in a 1500 MHz wide FDD channel in the 71-86 GHz bandplan, 256QAM modulation with ATPC+ACM), but self-aiming and motorized with stepper motors/servo mechanisms and service-channel data transfer for GPS-assisted aiming at a moving platform.
- zw123456 10y agoYes, the higher you go in the frequency the more it is like light. But even at mm-wave such as say for example 28Ghz you still have penetration through walls, but the loss is very high, for 28Ghz it is about 19db for a according to IWPC for a typical house wood wall. For light, the loss is basically infinity. Building a user device, like a phone or tablet with stepper motors or servo mechanisms is probably not very realistic I don't think.
- walrus01 10y agoI'm not talking about anything other than going through free space air with clear Fresnel zone, this is for backhaul/trunk links... A drone might be a flying series of sector antennas/phased array in 5.x GHz serving CPE radios, but it also needs an uplink.