7 ms·
HDMI out? I wonder if they're going to simulate NTSC TV artifacts such as colour bleed and dot crawl. These artifacts are important for correctly rendering NES
by chongli 10y ago
HDMI out? I wonder if they're going to simulate NTSC TV artifacts such as colour bleed and dot crawl. These artifacts are important for correctly rendering NES games according to their original design [0].
[0] http://www.gamasutra.com/blogs/KylePittman/20150420/241442/CRT_Simulation_in_Super_Win_the_Game.php http://www.gamasutra.com/blogs/KylePittman/20150420/241442/C...
- Bahamut 10y agoThey probably have an emulator already built, given that they sell NES Virtual Console games & have quite a history having ported their games to various platforms (goes as far back as the Game Boy Color I believe with having ported Super Mario Bros. - that is over 16 years ago).
- foldor 10y agoIf we're counting ported games, I might count Donkey Kong on the NES as their first attempt, though I'm sure someone can find an earlier example.
- Bahamut 10y agoWell, I guess they do have a longer history if you count arcade games too. You're probably right on that front.
- rangibaby 10y agoid Software's Keen series was a result of them porting Mario for PC but being denied a license by Nintendo.
- ataylor284_ 10y agoReimplemented, not ported. They wrote it from scratch, using innovative techniques to get the smooth side scrolling that was supported by hardware in consoles.
- bydo 10y agoBack in the day nearly every "port" was a full reimplementation, from the code to custom graphics and sound. Such are the perils of writing to bare metal.
- mattl 10y agoThere are lots of ports from the 8-bit home computer era which don't have this problem. See for example, the number of ZX Spectrum ports to the Amstrad CPC machines.
- Narishma 10y agoYes, and they usually were terrible ports. They ran poorly and didn't take advantage of the CPC's better hardware.
- mrob 10y agoCommander Keen was an impressive achievement for the time, but it did not have console quality smooth scrolling. It ran at only 35fps, not the 60fps of the NES Mario games. The earliest (better than) console smooth scrolling PC game I can think of is Monster Bash, which runs at 70fps.
- bydo 10y agoRomero discusses this briefly here: https://vimeo.com/148909578 https://vimeo.com/148909578
- avar 10y agoThey're releasing with 30 games, and although they don't say it explicitly reading between the lines there's no mention of being able to install more, so they don't need a generic emulation for the 700-ish NES games that were released.
- stephankoelle 10y agopal never had them
- acomjean 10y agoSo was there an Nintendo in PAL format? (PAL tvs had 100 more lines and refreshed a little lower 25, vs NTSC's 30 frames per second) Seems like it would be a pain to make that work. Knowing the pain of PAL <-> NTSC tv conversion.
- DominikR 10y agoIt's probably better to emulate NTCS as PAL games very often ran slower when compared to the NTSC versions of the same game.
- fredoralive 10y agoThe traditional game console solution for PAL consoles was to just have letterboxing with the extra 100 lines blank, with everything vertically squashed a little. Games usually didn't compensate for the lower framerate, so just ran slower. PAL console gaming was a GREAT experience, as you can imagine. Things got better from the Dreamcast onwards as they could software switch to 525 line / 60Hz modes (usually with PAL encoded colour for composite video, except for the PS2 which used pure NTSC), and it's all now moot with HD.
- Flow 10y agoHere's a comparision of Super Mario Bros 1 NTSC vs PAL. https://www.youtube.com/watch?v=mUI5xFEW_tg https://www.youtube.com/watch?v=mUI5xFEW_tg They show more graphics at the top and bottom, probably nothing that affects actual gameplay, but it's nice it's not just black regions.
- seanp2k2 10y agoNot all moot with HD; we have new and exciting problems! Now we have issues with poor-quality cables not being able to negotiate 4K 60hz 4:4:4 chroma, the Vizio 2016 P series negotiating 4:4:4 but actually doing 4:2:2 internally ( https://hardforum.com/threads/2016-vizio-p-series.1896948/ https://hardforum.com/threads/2016-vizio-p-series.1896948/ // http://www.rtings.com/tv/reviews/vizio/p-series-2016 http://www.rtings.com/tv/reviews/vizio/p-series-2016 if you're curious , there is also a long thread on AVSForum), etc. Good times.
- davb 10y agoI'm guessing they'll use the same emulator design as they have on the 3DS, where a number of the listed games are available.
- intoverflow2 10y agoMore likely it's just a regular Famiclone chip seen as that would cost a fraction of the price shipping even a "lite" version of 3DS internals
- mrob 10y agoThose video flaws are not important, as proven by the existence of the PlayChoice-10, an arcade machine which played NES games with high quality RGB video. https://en.wikipedia.org/wiki/PlayChoice-10 https://en.wikipedia.org/wiki/PlayChoice-10
- vanadium 10y agoOr the NESRGB project, for that matter (which I'm installing into my Famicom Twin): http://etim.net.au/nesrgb/installation-famicomtwin/ http://etim.net.au/nesrgb/installation-famicomtwin/
- DominikR 10y agoMost younger persons might not care about this, but some are buying dedicated video hardware like the XRGB Framemeister to emulate the picture that you had back then on old CRT TV sets. (scanlines etc) I don't like the sharp and blocky video you see today on modern LCDs when using old consoles. I also don't like the video filters that some emulators use to make the games not look too pixelated. I just want it to look approximately (emulating it perfectly is probably out of scope for this price) as it did back in the 80ties. Hope Nintendo provides an option for scanlines.
- Tiktaalik 10y agoA Framemeister isn't just for the option of emulating scaliness, it's for being able to satisfyingly play old consoles on a HDTV period. The built in upscalers in these TVs aren't designed for consoles and will mangle the video output into garbage.
- DominikR 10y agoI know, I use it myself. It's just isn't that user friendly especially if you use many different consoles because you'll often require different settings. For some consoles that output different types of resolutions depending on the game you'll also need to change the settings on a per game basis. So it's only something for enthusiasts.
- fredoralive 10y agoSlight rant, but I wish these CRT simulators could simulate decent CRTs, they always seem to emulate really shit ones with huge curvature and really exaggerated scanlines etc, can't they emulate a nice Trinitron TV or something. They always just look fake to me. (Yeah, I know there is possibly a bit of memory cheating, plus I used RGB SCART for the later period of CRT use that avoided the composite problems).
- writeslowly 10y agoThe ones I've seen included with MAME (or maybe it was a MAME front end) are pretty easy to configure to get the look of a nice CRT display. Maybe because of the focus on emulating high-end arcade hardware instead of the sort of television set that the typical NES was plugged into.
- VonGuard 10y agoShovel Knight is the only game that actually gets down and does CRT emulation correctly is this one: http://www.gamasutra.com/blogs/KylePittman/20150420/241442/CRT_Simulation_in_Super_Win_the_Game.php http://www.gamasutra.com/blogs/KylePittman/20150420/241442/C...
- lerpa 10y agoThat article has a huge misunderstanding when it comes to ghosting. In normal CRT TVs or monitors you could not see the previous frame at all.
- groovy2shoes 10y agoThe whole frame, no. But due to the persistence of phosphors, any pixel which weren't re-excited in a replacement frame would have some amount of "ghosting" while the phosphors "cool down" from the previous frame. The effect is more pronounced on black backgrounds, and nonexistent on white backgrounds, with other colors being heavily dependent on the contents of previous frames. Higher-quality CRTs also tended to have less persistence (my VT 520, for example, has virtually no visible persistence).
- city41 10y agoHonestly most (if not all) retro gamers don't feel that way. We prefer to see the actual pixels. The XRGB Framemeister upscaler is the most popular way to play retro games on modern TVs, and it provides a visual experience about equivalent to an emulator on a PC. The other popular way is to use an RGB monitor. Both provide pretty darn close to pixel perfect rendering. I've never met a single gamer into old games that prefers the artifacts the old, cruddy CRTs we used to use had. We're all quite relieved they're gone, to be honest.
- chongli 10y agoSpeak for yourself. I prefer to have accurate rendering, especially for something like pseudo transparency which straight pixel displays always get wrong.
- city41 10y agoBut I challenge the notion of "accurate rendering". Only America had crappy TVs. Europe had SCART and Japan had RGB21. While America was suffering through a blurry mess, everyone else had beautiful RGB output. I strongly contest the idea that developers "intended" games to look that way.
- Fej 10y agoHe's referring to a certain trick used to create neat transparency effects on CRTs. Like this one: http://i.imgur.com/9pI7cK3.png http://i.imgur.com/9pI7cK3.png Of course, that was most certainly intended, and the effect could be seen on any CRT (afaik).
- city41 10y agoThat isn't actually a CRT effect. A good quality CRT would look like the left picture. For example Mega Man X4 is often cited as using this "effect" as well, http://www.mattgreer.org/articles/sega-saturn-and-transparency/img/mmx4ViaComposite.jpg http://www.mattgreer.org/articles/sega-saturn-and-transparen.... But here's the same game running on my arcade CRT monitor: http://i.imgur.com/SAUkg5J.jpg http://i.imgur.com/SAUkg5J.jpg And my arcade monitor is not a good CRT at all (sadly...). Good CRTs look like this: http://imgur.com/a/Ad0pe http://imgur.com/a/Ad0pe In the last photo of the fighting game, that "grid" pattern in the back of the meters would look like the Sonic waterfall on bad CRTs, but is clearly defined on good ones There are some CRT specific effects. For example the black shadow under the ninja in this video should be rapidly moving back and forth between each character to accomplish a transparency effect. But most modern TVs can't do it: https://www.youtube.com/watch?v=NYsa8NQICnY https://www.youtube.com/watch?v=NYsa8NQICnY (For the record good upscalers fix that shadow effect.) My point is that the article that started this thread that claims old games are supposed to look like this http://i.imgur.com/Pq2Yra4.png http://i.imgur.com/Pq2Yra4.png is just utterly not true. It's a terrible myth that someone who is misinformed started.