4 ms·
It's easy to forget how "rocketpunk" CRTs were: High voltage anodes! Dangerous chance of implosions and/or X-Rays! Amazing to think it was only a few decades s
by WorldMaker 10y ago
It's easy to forget how "rocketpunk" CRTs were: High voltage anodes! Dangerous chance of implosions and/or X-Rays!
Amazing to think it was only a few decades since where just about every household had at least one CRT, if not just about one in every room. Sometimes we forget the past was also a strange place.
- ZenoArrow 10y agoYeah, CRTs are pretty "rocketpunk", though there's a similarly "rocketpunk" device still found in many homes today... the microwave oven.
- WorldMaker 10y agoI remember one of my grandmothers had one of those early Microwave ovens that was a giant lead box that ate up the majority of a countertop. Sometimes you see how thin and lightweight Microwave ovens you can find in stores these days are and wonder about how much changes in steel/aluminum, wave beamforming (magnetrons!), and a general sense of mundanity has impacted the size of the device... Also interesting to think just how much we do with microwave beams these days (particular good old 2.4GHz and 5GHz, our WiFi friends).
- fuzzfactor 10y agoThe microwave was launched into a misjudged market. It was thought necessary for the device to be percieved as able to replace a conventional oven, so it was engineered to handle as large a whole turkey, with the advantage of cooking it faster and with less waste heat into the kitchen. In physics, cooking always requires more time than heating. The pure heating speed advantage of the microwave was not leveraged until somebody got the idea to make small low-powered units not primarily for cooking but instead for simply heating coffee and snacks in the office. Until that market was saturated, and the price dropped low enough for consumers, and by that time the consumers were already familiar with the device. Once millions of people could easily put them in their shopping carts, they flew off the shelf. Source: I was hired as the first computer programmer for an appliance company about the time these were being launched, but I had already been studying businesses for a while. It required two deliverymen on a truck to carry and install a microwave at this time in the '70's, when the driver alone could usually handle a refigerator. Microwaves were priced comparable to high-end conventional ovens. OK, I'm old, lets get nostalgic. It's not the real vintage turkey-sized microwaves like your granny's that I miss having around. Lots of them probably ran for decades after they were made anyway, some might be running still. What about the low-end bargain units that mainstream consumers buy the most of? Each decade these achieve lower levels of quality never before thought possible. Mainstream quality lost forever as the majority of the population becomes too young to remember what it was like. Fortunately the Alto was not (intentionally and/or largely) engineered to have a finite lifetime. Almost the opposite was the mindset at the time. It was expected to require quite some time to explore the capabilities of such a novel unit, so the electronics were supposed to last for many many years into the future. That's what makes this restoration quite possibly fully within reach without having to rely on overwhelmingly unrealistic amounts of good fortune. Also, I do have good ideas about how to handle some of the circuit boards from the Alto pictures I have seen. In my field I kept some '70's-built scientific data systems going continuously since the mid-'80s until retiring them still-working two years ago. These have similar densely populated processing, ROM, and RAM PCB's. All soldering must far exceed NASA specs and be done by a loving operator . . . and that's the tip of the iceberg. Also remember converting a less-vintage, cheap, but actually-available non-Ball monochrome CRT to replace an original unobtainium old Ball, to interface with a proprietary display system. Just had to figure out where to solder so it would work with a display card it was not intended for. It can be useful being hands-on to get the best performance out of the electronics itself. A few courses in vacuum tube electronics at an early age seems like it would still be helpful for a lifetime of naural science. Edison was a very clever fellow. I suppose I would have been more clever not to have discarded a few dozen kilos of Xerox pre-PC office machines two years ago to make room for my working science gear.
- 13of40 10y agoI remember my dad explaining how the electron beam scanning worked when I was about 8 or 9 and I totally didn't believe him until he showed me the magnet-on-the-TV-screen trick... (And it just occurred to me that there are probably some younger people here who haven't seen that one. You can probably find it on YouTube if you don't have a CRT handy.)
- amyjess 10y agoI have fond memories of synchronized degaussing in high-school computer science class. We'd all open up the menus on our monitors and then select the degauss option at exactly the same time. Made a big ol' noise with that one. Can't do that with an LCD, unfortunately.
- molecule 10y agoWow, I had forgotten about degaussing. I worked in a plasma-physics lab in the 90s. Degaussing was required when an experiment was running-- strong electromagnets distorted the CRTs.
- rbanffy 10y agoThere was a time I had on my desk a 21 inch Sony CRT that degaussed every monitor within 6 feet along with itself.
- ZenoArrow 10y agoI'm glad you had your dad there to explain how CRTs work. The plight of those relying on poets was not as pleasant... https://m.youtube.com/watch?v=75WFTHpOw8Y https://m.youtube.com/watch?v=75WFTHpOw8Y
- jonah 10y agoOh, I dunno. I love this explanation!
- deleted 10y ago[deleted]
- rbanffy 10y agoIt's impressive how much time of our careers was spent sitting in front of a particle cannon.
- bootload 10y ago"Amazing to think it was only a few decades since where just about every household had at least one CRT," Still got one to play games on. Reminds me of physics at High School and we get the part where the teacher, Thurgy (Mr. Thurgood) was explaining magnetism and electron fields and how CRTs work. Next class we get further explanation and the bonus story of one student ringing him at twelve o'clock at night asking how long before the purple blotches on the television will disappear before his parents got home? Student Tim had decided to get locate the largest magnet in the house and placed it over the screen to "just see what happens?". The blotches take about two hours depending on the strength of the magnet and if you don't damage the aperture grille. Can't do that with LED screens.
- teh_klev 10y agoWhen I worked as a field engineer I used to have to fix the bloody things (sometimes on site as well). I'm perfectly happy for forget all about CRTs after all the electrical jolts and other hair raising moments I used to get off them :)