3 ms·
The way the shape of the combustion area changes to include long thin areas as the rotor is moved looks like an emissions nightmare. Deep and/or wedge shaped c
by dsfyu404ed 10y ago
The way the shape of the combustion area changes to include long thin areas as the rotor is moved looks like an emissions nightmare. Deep and/or wedge shaped combustion chambers went away in the 1960s because of that.
Emissions speculation aside, what part of this is superior to a Wankel?
I can see the three chamber design having merit for compression ignition apps because you can better spread the combustion force around the block and reduce the amount of material needed for a particular power level or part life. With some creativity off-highway diesel could probably be used a the lubricant(highway diesel is ultra low sulfer and doesn't lubricate well at all) in low power (portable equipment) applications. All the simplicity and light weight of a two stroke gas engine but with far less idle fuel consumption, no worrying about forgetting to premix or forgetting that you already premixed and doubling the oil and you can refill it by siphoning off your tractor (and don't have to worry about fuel going stale over the winter). This is just wishful thinking though.
With a little reworking the three small chambers per rotor would probably be pretty nice for an air compressor application. More of a smooth hum and less of a drone.
The only possible thing I can think of is
- deelowe 10y agoThey list the benefits here: http://liquidpiston.com/technology/engine-benefits/ http://liquidpiston.com/technology/engine-benefits/ Last time this was discussed, the power density was listed at the most interesting feature. Also that apex seals are in the casing instead of the rotor, which I think some speculated could help with wear/maintenance.
- en4bz 10y agoSince combustion happens on the three corners of the engine the heat distribution will be much more even compared to a Wankel where there is a heat differential between the combustion and compression side of the engine. Since there is better heat distribution the tolerances may be able to be smaller reducing the sealing issues.