2 ms·
"used a maximal-length LFSR for the program counter." I found Wikipedia entry on MLS-LFSR. How do those end up useful in program counters? "you may want to lo
by nickpsecurity 10y ago
"used a maximal-length LFSR for the program counter."
I found Wikipedia entry on MLS-LFSR. How do those end up useful in program counters?
"you may want to look into bit-serial techniques"
You talking about the 1-bit ALU's like these?
https://www.cs.umd.edu/class/sum2003/cmsc311/Notes/Comb/onebitALU.html https://www.cs.umd.edu/class/sum2003/cmsc311/Notes/Comb/oneb...
Making a comeback in another field:
http://www.caesjournals.org/uploads/IJCAES-CSE-2012-132.pdf http://www.caesjournals.org/uploads/IJCAES-CSE-2012-132.pdf
- aaeegg_20160625 10y agoYou wouldn't normally use an LFSR as a program counter, because it's more convenient to have the instructions execute from address 1, 2, 3, 4, etc rather than (say) 79, 30, 61, 122, etc. But an LFSR has fewer gates than an adder, which is why it was used in those old 4-bit processors. The last diagram in the page you linked shows three 1-bit ALUs chained together to make one 3-bit ALU. As I understand it, the PDP-8/S used a single 1-bit ALU to sequentially calculate each bit in a 12-bit output word, taking 12 cycles to emulate a 12-bit ALU. For the 3-bit example, imagine there being a single ALU which acts first as the rightmost ALU in the diagram, and then once you have the carryout bit it acts as the middle ALU, and finally it acts as the leftmost ALU.
- nickpsecurity 10y agoAppreciate the tip.