2 ms·
One of my first jobs out of college was doing manual chip layouts (which will give you some idea of how old I am). Once the layout was done, the design was sen
by lisper 10y ago
One of my first jobs out of college was doing manual chip layouts (which will give you some idea of how old I am). Once the layout was done, the design was sent to a "mask house" which would print the layout onto a series of glass plates (the "masks") which were then used in the chip fabrication process. When the masks for my first chip came back I popped one of them into a bench microscope to see what it looked like. I was expecting to see my design in black-and-white printing, but all I could see (of course) were rainbows because the mask was effectively a diffraction grating. This was my first visceral encounter with quantum mechanics. I knew there was a pattern there, but I could never see it directly with my own eyes.
- kens 10y agoWhat era of chip layout was this? I'm surprised that manual chip layout was still being done when chip features were that small. I look at 1970s chips a lot, and the features are easily visible under a microscope, as they are much larger than wavelength-sized.
- lisper 10y agoThis was in 1984, and it was for experimental chips, not production chips. The layout was done using CAD tools, but the placement was all manual. Also, I think they were analog chips, not digital. I'm not sure. This was a co-op job in my first year at college at the IBM plant on Cottle Road, and I was never fully in touch with the big picture. I think they were making big-ass hard drives, and the chips I was working on were part of the circuitry that amplified the raw signal from the read-write head, but those details were way above my pay grade.
- NegativeLatency 10y agoHow many features were on the chip?
- lisper 10y agoI have no idea. This was more than 30 years ago. But the number of transistors was in the hundreds or maybe low thousands. (I can't recall if I was laying out individual transistors or functional modules.)
- ci5er 10y agoAt Motorola, in MCU, they (we?) were still doing some manual layout (not much, but still...) on 8-bit and 16-bit core products as late as 1989. Of course, none of the more advanced CPUs or soon-to-come DSPs did. IF I recall correctly (and I probably don't), depending on the fab, for those parts, we were at or around 1micron at the time. It was an MCU, which many might call a SoC these days, but with all the timers and serial i/o and the A/D and D/A converters and PWMs - the 8-bit family (HC11) was probably around 50K transistors in an 80-pin QFP. The HC11 had a 6809(enhanced) core. I think the 6809 was ~9K transistors, but I seem to recall that ours was a bit bigger than that. Still ~3/4 of the die was "not-CPU".