5 ms·
I have just built a PC with a M.2 Samsung 950 Pro on a Z170 motherboard (make sure you get the Z170 so the M.2 slot can use 4 PCI-E channels). The performance
by nl 10y ago
I have just built a PC with a M.2 Samsung 950 Pro on a Z170 motherboard (make sure you get the Z170 so the M.2 slot can use 4 PCI-E channels).
The performance of this thing is insane. Ars benchmarked it at 2600MB/s read, 1500MB/s write for sequential data[1]. Most SSDs benchmark at less than 600 MB/s[2].
By comparison, a RAM Disk gets ~6000MB/s on the https://hardforum.com/threads/quad-channel-ram-disk-benchmark-with-crstal-diskmark.1842437/same https://hardforum.com/threads/quad-channel-ram-disk-benchmar... benchmark.
[1] http://arstechnica.com/gadgets/2015/10/950-pro-review-samsungs-first-pcie-m-2-nvme-ssd-is-an-absolute-monster/ http://arstechnica.com/gadgets/2015/10/950-pro-review-samsun...
[2] http://www.guru3d.com/articles-pages/samsung-850-evo-ssd-review,13.html http://www.guru3d.com/articles-pages/samsung-850-evo-ssd-rev...
[3] https://hardforum.com/threads/quad-channel-ram-disk-benchmark-with-crstal-diskmark.1842437/ https://hardforum.com/threads/quad-channel-ram-disk-benchmar...
- olavgg 10y agoHow many iops do you get when you test it with fio (http://linux.die.net/man/1/fio http://linux.die.net/man/1/fio) ? Example: sudo fio --filename=/home/olav/testfile --direct=1 --sync=1 --rw=read --bs=4k --numjobs=8 --iodepth=32 --runtime=60 --time_based --group_reporting --size=1G --name=journal-test
- nl 10y agoNot in-front of it now. Will try to remember to do this though.
- ElijahLynn 10y agoPlease do this, the IOPS are very important!
- Qiasfah 10y agoAnandtech's results may be applicable here too: http://www.anandtech.com/show/9702/samsung-950-pro-ssd-review-256gb-512gb/3 http://www.anandtech.com/show/9702/samsung-950-pro-ssd-revie...
- cmurphycode 10y agoFor 4K random reads, you'll probably want more than 32 iodepth, even on a consumer drive like this. And you'll want to try to write to each offset in the drive beforehand in case they have a "return 0" shortcut (like many enterprise drives).
- fahadkhan 10y agoI have two of these in raid 0 in a Lenovo P70. fahad@heffalump:~/fiotest$ sudo fio --filename=$PWD/testfile --direct=1 --sync=1 --rw=read --bs=4k --numjobs=8 --iodepth=32 --runtime=60 --time_based --group_reporting --size=1G --name=journal-test journal-test: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=sync, iodepth=32 ... fio-2.2.10 Starting 8 processes journal-test: Laying out IO file(s) (1 file(s) / 1024MB) Jobs: 8 (f=8): [R(8)] [100.0% done] [367.8MB/0KB/0KB /s] [94.2K/0/0 iops] [eta 00m:00s] journal-test: (groupid=0, jobs=8): err= 0: pid=25184: Wed Jun 1 17:32:44 2016 read : io=22265MB, bw=379986KB/s, iops=94996, runt= 60001msec clat (usec): min=15, max=19595, avg=83.59, stdev=102.01 lat (usec): min=15, max=19595, avg=83.65, stdev=102.02 clat percentiles (usec): | 1.00th=[ 20], 5.00th=[ 65], 10.00th=[ 66], 20.00th=[ 68], | 30.00th=[ 75], 40.00th=[ 79], 50.00th=[ 80], 60.00th=[ 82], | 70.00th=[ 84], 80.00th=[ 90], 90.00th=[ 97], 95.00th=[ 108], | 99.00th=[ 141], 99.50th=[ 173], 99.90th=[ 900], 99.95th=[ 1704], | 99.99th=[ 4768] bw (KB /s): min=43704, max=53976, per=12.51%, avg=47524.23, stdev=1225.35 lat (usec) : 20=0.74%, 50=1.42%, 100=89.28%, 250=8.32%, 500=0.09% lat (usec) : 750=0.03%, 1000=0.03% lat (msec) : 2=0.06%, 4=0.02%, 10=0.01%, 20=0.01% cpu : usr=1.38%, sys=7.92%, ctx=5737418, majf=0, minf=89 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued : total=r=5699889/w=0/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0 latency : target=0, window=0, percentile=100.00%, depth=32 Run status group 0 (all jobs): READ: io=22265MB, aggrb=379986KB/s, minb=379986KB/s, maxb=379986KB/s, mint=60001msec, maxt=60001msec
- olavgg 10y agoThat is awesome, what do you get with writes? (rw=write)
- nl 10y agoI ran both: https://gist.github.com/nlothian/e22ee30c6ccb8d473058d9e0864d3b13 https://gist.github.com/nlothian/e22ee30c6ccb8d473058d9e0864... Read is a lot (LOT) faster than writes. Enough to make me thing I might have something misconfigurated there(?), although I'm not familiar enough with this benchmark to know for sure.
- philipov 10y agoWhat operating system do you use? I am trying to install windows 7 on those exact specs (M.2 Samsung 950 Pro on Z170 motherboard, ASRock Extreme6+), and I'm having trouble getting it to either recognize the M.2 slot during install, or partition an alternate SATA Samsung 850 EVO SSD to clone from. Did you have similar difficulties?
- jkot 10y agoMy bet is 64bit Linux
- isuraed 10y agoDis you change bios to ahci instead of ide for the disk?
- livus 10y agoWindows 7 can be a PITA in such cases. From what I've seen, Windows 7 has started to show its age when it comes to hardware. Quite a bit of modern hardware like NVMe SSDs and USB 3 are not recognized out of the box. You're most stable bet would be to go with Windows 10 if you can. There'll be tradeoffs which I guess you are already aware of.
- ElijahLynn 10y agoI am guessing a flavor of Linux.
- ghshephard 10y agoI attempted to install the exact same card (M.2 Samsung 950 Pro) into a NUC5I7RYH, as well as a backup SATA (Seagate 1TB Laptop Gaming SSHD (Solid State Hybrid Drive) SATA 6Gb/s 64MB Cache 2.5-Inch Internal Bare Drive (ST1000LM014)) - Neither one of them worked with Windows 7 out of the gate, and I ended spending a 4-6 hour odyssey of googling BIOS upgrades, Firmware Upgrades, and downloading various and sundry windows drivers (my final count was around 8-10 before all was said and done). Ironically, we thought that Windows 7 would have had better support - but, as it turns out, for Circa 2H2015+ hardware, it's probably not a great platform. Here's hoping that Windows 10 stabilizes for a few years, and all the vendors agree to support that platform....
- basch 10y agoALL sata 3 SSDs should benchmark at 600MB/s or less, because 600MB/s is the maximum supported bandwidth throughput of SATA 6Gb/s
- zerohp 10y agoThe 950 Pro (NVMe) uses PCIe x4, not SATA.
- basch 10y agocorrect, i was replying to the sentence preceding source 2. "Most SSDs benchmark at less than 600 MB/s[2]."
- colejohnson66 10y agoWhich is why NVMe and M.2 are a thing now. SSDs have surpassed SATA (and in some cases, even SAS)
- basch 10y agoIf you look at the post i was replying to, source two was a sata drive, and the claim was "most ssds cap out at 600MB/s" of course they do, that is the theoretical limit of non pcie drives.
- jobu 10y ago> I have just built a PC with a M.2 Samsung 950 Pro on a Z170 motherboard Ditto - I built mine at the beginning of the year. It's very fast, but I learned two things that weren't widely reported at the time. 1) The chips on the drive get _very_ hot under use (thermal throttling kicks in at 75C). Even with minimal use they seem to have a running temp > 50C. I'm a little nervous about the long-term reliability of the drive based on the heat alone. 2) Boot speed with Windows is still fairly slow unless the drive is formatted to GPT (GUID Partitiion Table) instead of the default MBR. It's possible to do this when installing Windows, but there's no easy way to convert after installing
- dmunoz 10y ago> I learned two things that weren't widely reported at the time. For what it's worth, the Anandtech review [0] mentioned your first issue in their review back in October. Anandtech has missed things in the past, but I trust them a lot to find and point out possible issues with hardware. [0] Linking to the last page 'Final Words' section as it is mentioned up front and centre there. A lot of times, I'll read or skim the first page, and jump directly to the final page conclusion for hardware I just want a quick overview of - http://www.anandtech.com/show/9702/samsung-950-pro-ssd-review-256gb-512gb/12 http://www.anandtech.com/show/9702/samsung-950-pro-ssd-revie...