3 ms·
I have to agree. Every few years I'll try again with LEDs and energy efficient bulbs. I'll look online, buy a few different brands and specifically look for the
by djsumdog 10y ago
I have to agree. Every few years I'll try again with LEDs and energy efficient bulbs. I'll look online, buy a few different brands and specifically look for the ones with a "cool" colour temperature that should look natural.
In every instance the lighting was terrible. I really haven't yet found an energy efficient bulb that didn't make my place look like a jail cell.
My current place has halogen track lighting and I really like it.
- colonelxc 10y agoIf you are looking for "natural" indoor lighting (like for a bedroom or living room), you probably want a "warm"er color, on the range of 2400k to 2600k. http://go/wiki/Color_temperature#Categorizing_different_lighting http://go/wiki/Color_temperature#Categorizing_different_ligh...
- lutorm 10y agoYou don't want "natural" lighting if you want it to look like an incandescent. "Natural", ie "day" light is very blue. You specifically want a non-natural, warm color temperature.
- wlesieutre 10y agoFire is plenty natural. In architectural lighting, the reference spectrum depends on color temperature. Warm whites are measured against the black body spectrum, cool whites are measured against the daylight spectrum.
- lutorm 10y agoWhat do you mean? Daylight is very close to a blackbody.
- wlesieutre 10y agoClose but not quite, atmospheric effects block some portions. We use the CIE d-series illuminants as an approximation: https://en.m.wikipedia.org/wiki/Standard_illuminant#Illuminant_series_D https://en.m.wikipedia.org/wiki/Standard_illuminant#Illumina... That's done because it's very unusual to get a black body radiator that hot on Earth, so if you're talking about something on the cool white end odds are high it's daylight or trying to approximate it, not a tungsten filament or a campfire.
- wlesieutre 10y agoHalogen is very much not a cool color temperature. If you're trying to match your existing halogen lighting, stick to lights labeled "warm white". If they list a color temperature, 2700K is a reasonable option, 3000K works in a pinch. Halogen bulbs are typically a bit over 3000K, but they'll shift warmer as they're dimmed, which is a pretty common use case. The vocabulary is a bit weird, since "warm white" corresponds to "low color temperature". It's because we mentally associate blue with cold/ice and orange with fire, but the color temperature scales are based on the color an object glows as you heat it. To make a black body glow blue you have to heat it pretty damn hot.
- rconti 10y agoCree for type A and downlights with 90+ CRI. I'm using Soraa single-source MR16s elsewhere in my house, with a CRI of 93+.