4 ms·
> gas sensors are cheap I wanted to buy one to check my pipes for leakage, but the only inexpensive thing I could find was a go/no-go sensor, and nothing somet
by ars 11y ago
> gas sensors are cheap
I wanted to buy one to check my pipes for leakage, but the only inexpensive thing I could find was a go/no-go sensor, and nothing something with an actual reading.
- ChuckMcM 11y agoThis one (http://www.seeedstudio.com/depot/Grove-Gas-SensorMQ2-p-937.html http://www.seeedstudio.com/depot/Grove-Gas-SensorMQ2-p-937.h...) is $7, Its sensitivity can be adjusted by the pot, so putting a digital potentiometer on the board and driving it remotely should give you some "range". It isn't designed as a precision instrument but in an IoT situation just watching sensors detect something over time, correlated with wind speed and direction, should give useful information for the gas company at least. These guys (http://lmsnt.com/applications/applicationideas/ch4/ http://lmsnt.com/applications/applicationideas/ch4/) will sell you a sensor development kit. The commercial instruments are all several hundred dollars but my experience with specialty tools is that they have high prices to support high margins because they don't sell in very high volumes.
- joshvm 11y agoThere are a few factors. The gas sensors you can afford as a (poor) hobbyist tend to be resistive/heater devices. You heat up a catalyst and monitor its resistance which varies when a suitable gas is present. The downside is that typically they're sensitive to all kinds of gases - e.g. methane, ethanol other volatile organic compounds and so on. Either you can use them in a single-gas environment, or where you would only expect one polluting gas, or you can have a general threshold. Cheap and cheerful and nice for IoT home "air quality" sensors, but useless for real measurements. Most of the very expensive sensors - like the one you linked - have much higher specificity. That methane detector is optical and is tuned precisely for the IR absorption band of the gas. Optics and filters are expensive, plus the driving circuitry and probably NIST-traceable calibration if you want it. EDIT: It also uses a fairly unusual LED wavelength which adds to the price (InGaS = money). Other sensors, like Oxygen, have shelf lives of a few years and need to be replaced even though they're horribly expensive ($200 or so). A filtered methane sensor is about $50 (Figaro make a lot of nice gas sensors): http://microcontrollershop.com/product_info.php?cPath=301_428_579&products_id=6786 http://microcontrollershop.com/product_info.php?cPath=301_42... AMS also make some nice inexpensive general VOC sensors like this one: http://www.digikey.co.uk/product-detail/en/ams/AS-MLV-P2/AS-MLV-P2CT-ND/5117220 http://www.digikey.co.uk/product-detail/en/ams/AS-MLV-P2/AS-...