31 ms·
> But, what 2016's tech would bring is a 6502 that instead of being clocked at 1.5-2Mhz might be clocked instead at a couple Ghz. For most applications in 2016
by JoshTriplett 11y ago
> But, what 2016's tech would bring is a 6502 that instead of being clocked at 1.5-2Mhz might be clocked instead at a couple Ghz.
For most applications in 2016 that could actually use a 6502, they probably don't need it to run that fast (and more speed would mean more power usage). New pin-compatible 6502s are still sold today for embedded applications: http://www.tomshardware.com/news/mouser-6502-motorola-6800-cpu-processor,14557.html http://www.tomshardware.com/news/mouser-6502-motorola-6800-c...
But if not for pin-compatibility, instead of being 4.3mm x 4.7mm, a 6502 could be a speck of dust, with the only size constraints being connections to other components.
> What a modern 6502 design might do, however, is be extremely power efficient. A modern 2016 CMOS design clocked at 1970's speeds might use very little power. Whether it would beat ARM in that market is an unknown.
The 6502 design from 2012 that I linked above uses 300µA.
> The 6502 would also be quite acutely sensitive to the speed of memory, so the chip would not be able to run any faster than RAM could feed it data (it has only three user accessible 8-bit registers, and only one of those can be used for computations). It worked with 1970's tech because 1970's memory's were as fast as it was so it was not slowed down by a huge memory vs cpu speed differential.
The 6502 also only addressed 64kB of memory (though variants like the 6509 supported up to 1MB via multiple banks). With 2016 technology, you could easily supply all the RAM a 6502 could ever want or use as on-die SRAM that matches the CPU speed.