4 ms·

ZFS does support different sized drives, and you can add disks to a pool easily. It does not support different sized drives in a raidz (equivalent to an mdadm

ZFS does support different sized drives, and you can add disks to a pool easily. It does not support different sized drives in a raidz (equivalent to an mdadm array), as far as I know, but you can mix raidz and singular drives in a pool, though that is a bit silly. It also does not support adding disks to a raidz, which is equivalent to growing a raid5 or raid6 array, which is admittedly a pain in the ass.

mbreese 10y ago
You can also upgrade an entire raidz vdev if you replace each drive in the vdev with a larger one (one at a time) and enable "autoexpand" on the zpool. It's a manual and time consuming process, waiting for each drive to resilver. Still an pain, but at least possible.
Annatar 10y ago
> It does not support different sized drives in a raidz % mkfile -v 64m /var/tmp/d0 /var/tmp/d0 67108864 bytes % mkfile -v 96m /var/tmp/d1 /var/tmp/d1 100663296 bytes % mkfile -v 128m /var/tmp/d2 /var/tmp/d2 134217728 bytes % sudo zpool create -f pool0 raidz /var/tmp/d0 /var/tmp/d1 /var/tmp/d2 Password: % zpool status pool: pool0 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM pool0 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 /var/tmp/d0 ONLINE 0 0 0 /var/tmp/d1 ONLINE 0 0 0 /var/tmp/d2 ONLINE 0 0 0 errors: No known data errors
- stewartbutler 10y ago
  You can build it, but it is limited to the smallest device in the vdev, so the array will appear to only have three devices of 64m available. Though you can replace all smaller disks and grow it.
  - Annatar 10y ago
    That is not how RAIDZ works. Because every write is a dynamic width stripe, the capacity is an aggregate minus parity, not linear. The smallest device capacity applies to RAID1+0, which is mirroring, but it does not apply to RAIDZ.

mbreese 10y ago

You can also upgrade an entire raidz vdev if you replace each drive in the vdev with a larger one (one at a time) and enable "autoexpand" on the zpool. It's a manual and time consuming process, waiting for each drive to resilver. Still an pain, but at least possible.

Annatar 10y ago

> It does not support different sized drives in a raidz % mkfile -v 64m /var/tmp/d0 /var/tmp/d0 67108864 bytes % mkfile -v 96m /var/tmp/d1 /var/tmp/d1 100663296 bytes % mkfile -v 128m /var/tmp/d2 /var/tmp/d2 134217728 bytes % sudo zpool create -f pool0 raidz /var/tmp/d0 /var/tmp/d1 /var/tmp/d2 Password: % zpool status pool: pool0 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM pool0 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 /var/tmp/d0 ONLINE 0 0 0 /var/tmp/d1 ONLINE 0 0 0 /var/tmp/d2 ONLINE 0 0 0 errors: No known data errors

stewartbutler 10y ago
You can build it, but it is limited to the smallest device in the vdev, so the array will appear to only have three devices of 64m available. Though you can replace all smaller disks and grow it.
- Annatar 10y ago
  That is not how RAIDZ works. Because every write is a dynamic width stripe, the capacity is an aggregate minus parity, not linear. The smallest device capacity applies to RAID1+0, which is mirroring, but it does not apply to RAIDZ.