Translation for those who care: ------------------- This time round I got into carpentry for my project. Something that became both expensive and trickier tha

Translation for those who care: ------------------- This time round I got into carpentry for my project. Something that became both expensive and trickier than I had thought when I started. My carpentry knowledge is limited to (high-)school lessons, so take it easy on the results. The project became more expensive than expected. Some 6000 SEK [~$740] including a whole bunch of tools (mill, jig saw, circular saw). Made do with 'Biltema' tools [the IKEA of tools] and returned the first mill after 1 hour of use. The other stopped after around 2 hours so then I fixed that one myself (took apart the start-button and modified it a bit). The project consists of: - 10/100 Mbps switch - Nexus 7 - 10A 6 port USB charger - 4 x Raspberry pi 3 - 4 x 8GB SD card - TP cables + USB cables - Oak - Plexiglass Anyway, you'd all probably rather see pictures than words. - Nexus 7 with realtime data for all nodes. - 'Economically' bought 8GB, not class 10, but thinking of running a 2.5" HDD for the controller node. - Sleeved all the cables, then realised that they didn't fit with the sleeving. Could only strip them and do again. - First test with 2 x USB hubs that didn't deliver enough current at start-up. - Flip-up "chassis" - My modified netdata page showing real-time data for all nodes, including the temperature. - Running Docker with Kubernetes on the cluster. ------------------- [Any errors/omissions are my own]