7 ms·
New 8-megapixel camera board on sale at $25
- anc84 11y agoI so hope that some day there will be a widely available wide angle version or easy-to-plug-on lens of this. Also an official multiplexer would rock so one could connect more than one camera to the Pi.
- benn_88 11y agoYou can use two cameras with the compute module. See https://www.raspberrypi.org/blog/real-time-depth-perception-with-the-compute-module/ https://www.raspberrypi.org/blog/real-time-depth-perception-...
- gruturo 11y agoMentioning an official multiplexer might imply you're already aware of this, but, in case you're not - here you go: http://www.ivmech.com/magaza/en/development-modules-c-4/ivport-raspberry-pi-camera-module-multiplexer-p-90 http://www.ivmech.com/magaza/en/development-modules-c-4/ivpo...
- doc_holliday 11y agoAwesome stuff. I do wish they'd release a module without the bayer filter for monochrome imaging. Granted it is maybe quite a bit of work to rewrite parts of the ISP to suit a relatively niche market of monochrome sensor...
- duskwuff 11y agoThe color filter is much more closely integrated with the camera sensor than the IR filter was. I don't know for sure, but I suspect it can't be removed without risking damage to the sensor.
- ncarlson 11y agoThe extent of the risk depends on the sensor and board assembly. But removing the CFA is not unthinkable[1]. [1] https://stargazerslounge.com/topic/210686-moon-with-de-bayered-ps3-eye-cam/ https://stargazerslounge.com/topic/210686-moon-with-de-bayer...
- duskwuff 11y agoIt can be done, yes, but it's a risky hack of an operation that literally involves prying the cover off the camera with a knife and polishing away the filter. It's not production-ready by any means.
- neals 11y agoI've been looking into home security lately and with the more expensive camera-kits (say $2k+)... I've been wondering if a de-centralized raspberry-pi setup might be so much better. And with 8mp I think I should start a POC, right?
- maerek 11y agoThere are a few projects out there [0][1] that make it fairly simple to set up a motion detection capable solution with a simple USB webcam. I'm currently waiting on a cheap infrared camera from China ($4!) for use with my Pi, but I've done testing with an older Logitech HD camera and have had excellent results. [0] Motion: http://lavrsen.dk/foswiki/bin/view/Motion/WebHome http://lavrsen.dk/foswiki/bin/view/Motion/WebHome [1] MotionEye: https://github.com/ccrisan/motioneye https://github.com/ccrisan/motioneye
- mangamadaiyan 11y agoIf you don't mind, could you please post a link to the $4 IR camera?
- maerek 11y agoI picked one up on eBay [0] that is currently in transit to my apartment. Manual focus, somewhat garish looking and with probably crummy resolution, but I'm willing to try it for $4. There are a large number of similar cameras on the market that ship from China/Hong Kong on eBay. YMMV, but if you've got a few bucks and are willing to wait, it may be worthwhile (depending on your use). [0] http://www.ebay.com/itm/USB-50M-6-LED-Night-Vision-Webcam-Camera-Web-Cam-w-Mic-Clip-for-PC-Laptop-Skype-/371464291994?hash=item567cff469a:g:OPMAAOSwAYtWHwpK http://www.ebay.com/itm/USB-50M-6-LED-Night-Vision-Webcam-Ca...
- kabdib 11y agoIndeed. (I have a project that needs to distinguish between cats in the dark. No kidding!)
- hugs 11y agoMaybe I missed it, but there's no mention of whether the focus is adjustable. In the previous version, it was glued at the factory to a fixed focus and the default was wrong for close-ups on objects. Sure, you could use pliers to "break" the glue, but there was a non-zero risk of breaking the sensor. I decided to go with a different, more adjustable-on-purpose camera, instead.
- egeekuk 11y agoAccording to the RS Components page [0] it appears to be fixed focus. [0] http://uk.rs-online.com/web/generalDisplay.html?id=raspberrypi http://uk.rs-online.com/web/generalDisplay.html?id=raspberry...
- hugs 11y agoThanks. I did miss it. :) Newark/element14's product info page didn't have that info when I checked on my mobile. (Edit: The info about fixed focus is there on the desktop version of the page. The Product Overview section didn't show up in the mobile version on my Nexus 5): https://www.newark.com/raspberry-pi/rpi-8mp-camera-board/raspberry-pi-camera-board-v2/dp/77Y6521?COM=superwidget-link_RaspberryPiAccessories%20CMPNULL https://www.newark.com/raspberry-pi/rpi-8mp-camera-board/ras...
- calinet6 11y agoI've found several USB webcam boards that work great, and give more flexibility when it comes to lens field of view and the like. The RPI is fantastic for a standing webcam setup using the USB camera, see: http://www.trisweb.com/webcam http://www.trisweb.com/webcam Does anyone have example photos from this new camera?
- mgamache 11y agoI would like to see a round cable version. I know this may not fit the design ethos, but I've had projects that I really wanted to use the Pi+camera and couldn't because of camera positioning (a 1m round cable would have worked) .
- tehbeard 11y agoYou'd be better off getting a USB webcam for that, I don't imagine CSI (Camera Serial Interface Type 2, the connection the camera modules use) works well over long distances.
- Kliment 11y agoWorks fine for me with a 2m ribbon cable.
- erstorreyk 11y agoI'd like to see something I can fit into a door's peephole. Everything I've found so far is too big or too bulky and needs an adaptor.
- eldog_ 11y agoI use this [1] HDMI Cable Extension which allows you to use and HDMI cable between them. Works perfectly. [1] https://www.tindie.com/products/freto/pi-camera-hdmi-cable-extension/ https://www.tindie.com/products/freto/pi-camera-hdmi-cable-e...
- khedoros 11y agoThe connection standard they used is really meant for use in a mobile phone, with a 3cm ribbon going from the board to the camera. I've seen CSI cables close to a meter for sale, but I'm not sure how reliably they work. The sibling post about the HDMI cable seems like your best bet. The USB camera idea would work too, but it wouldn't have the same performance characteristics as the PiCam (The Pi's USB implementation is terrible, as far as throughput and CPU load).
- ausjke 11y agoModules like this one have existed in surveillance industry for quite a while but this is the one for the DIY community I guess, the price really should be in the <$10 range though, otherwise it's fun to play with.
- stegosaurus 11y agoCould anyone who has the previous version comment on light response? I went out and bought a random webcam model from a local store for 7GBP as a proof of concept so that I could start hacking on the code. 640x480, but that doesn't matter too much for testing. It is completely unusable in most lighting conditions. I wanted to point it out of the window to track wildlife. Sunlight just overloads the sensor and you get white, low light and it's fully black. Is this something that requires higher cost equipment? I can't see how it could be useful as an ipcam if outdoor lighting destroys it.
- _pmf_ 11y agoYou can get an old phone with an equivalent camera for 25 USD.
- pen2l 11y agoSmall question if anyone might know: are the physical dimensions of this new v2.0 camera board identical to the past ones? (e.g. version 1.3?). For the most parts they look identical.
- kregasaurusrex 11y agoIs there a full datasheet available for it like there was for the OV7670 if we want to perform more bitwise calculations with it? http://www.cutedigi.com/pub/sensor/Imaging/OV7670-Datasheet.pdf http://www.cutedigi.com/pub/sensor/Imaging/OV7670-Datasheet....
- patrickg_zill 11y agoInteresting is the 4K video mode and the 120fps and 180fps modes. I wonder to what extent this will be usable/available on an Rpi.
- benbojangles 11y agoIs there an Rpi adapter to allow hdmi in via CSI port? It would be cool to use an action camera like a gopro
- nirav72 11y agoNot sure if this will work. But worth a try. Its $15 https://www.tindie.com/products/freto/pi-camera-hdmi-cable-e.. https://www.tindie.com/products/freto/pi-camera-hdmi-cable-e....
- benbojangles 11y agoThanks for linking, but you're right I think that's only for extending a pi cam. I'm looking at gopro hdmi out going to pi csi port. should be possible - digital -digital imaging.
- vittore 11y agoIt is also seems to be an infra-red camera, so I ll be able to do pictures like those with it (http://www.dpreview.com/forums/post/8539757 http://www.dpreview.com/forums/post/8539757) , not that artsy of course and make a timelapse.
- rincebrain 11y agoThere's two models - one with an IR filter and one without. (Slightly confusingly to me, the "NoIR" model is the one that can see IR, though I suppose the pun was too tempting.)
- vittore 11y agoI believe it means no IR filter, since that is how you get IR camera, by not having IR filter in front of sensor.
- ncarlson 11y agoThe IoT camera module market seems to be underserved. Here's my feature wishlist: * A monochrome sensor option * Better sensor documentation. Where are the quantum efficiency graphs? * Larger sensors. * Less emphasis on megapixels, more emphasis on efficiency. * Exposure control in microseconds * Binning * C, CS, or F lens mount. Heck, I'd even accept a M12 mount, so long as the lens isn't glued into place.