3 ms·
What sort of latency would you expect with a system like this (I mean the link in this submission, not satellites)?
by cm2187 11y ago
What sort of latency would you expect with a system like this (I mean the link in this submission, not satellites)?
- amazon_not 11y agoPoint to point wireless links like these usually have low latency, some under a millisecond.
- jlgaddis 11y agoFWIW, I've got several similar point-to-point microwave links in my network, including the following setup: h1 - sw1 - ptp1a -/- ptp1z - sw2 - ptp2a -/- ptp2z - sw3 - r1 - h2 h1 : Sun Fire server sw1 : Cisco 3560G switch ptp1a : 6 GHz point-to-point microwave transceiver ("A" end) ptp1z : 6 GHz point-to-point microwave transceiver ("Z" end) sw2 : Cisco 3560G switch ptp2a : 6 GHz point-to-point microwave transceiver ("A" end) ptp2z : 6 GHz point-to-point microwave transceiver ("Z" end) sw3 : Cisco 3560G switch r1 : Cisco 3945 h2 : Sun Fire server All connections are 1 GbE. ptp1a to ptp1z : 12.80 miles (20.60 km) ptp2a to ptp2z : 05.01 miles (08.06 km) From h1 to h2: --- x.x.x.x ping statistics --- 20 packets transmitted, 20 received, 0% packet loss, time 19305ms rtt min/avg/max/mdev = 0.955/0.995/1.157/0.049 ms Each of the two microwave links are advertised as being capable of 761 Mbps full-duplex.