4 ms·
> Though they don't live "down there" in tiny decompression chambers as the article claims. The chambers are on the surface (on-board a rig, a ship etc). I had
by schoen 11y ago
> Though they don't live "down there" in tiny decompression chambers as the article claims. The chambers are on the surface (on-board a rig, a ship etc).
I had never heard of this before; that sounds like a lot of uncomfortable strictures to follow for a long time! The Wikipedia article on saturation diving says that underwater living chambers are also an option, but seems to suggest that they're mainly used by scientific research divers (I'm not sure why that would be).
- DyslexicAtheist 11y agothese underwater chambers have been used in the 70ies 80ies afaik. but I personally have never seen one nor heard of anyone who had the opportunity to work in one (and most of the guys out there were in the early 50ies while I was very young in comparison). Not saying they didn't exist but their use was limited. Because "wet welding" or any type of work that requires a mechanical engineering effort carried out by a diver is usually not as solid/sound as welding the parts on the surface (out of the water). The welding seam produced by a diver is usually of lower quality (even if the diver is really well trained in welding impurities of the water are reducing the quality of the weld). Also many places where one would have to wet-weld it is too deep (even for sat-diving), so they would use ROV's anyway. There has to be a very special reason why one would have a team of divers do all this at the depth. Certainly not in the oil/gas industry. EDIT: clarification, I mention welding because welding/cutting (e.g. an oil pipeline) was usually a scenario where one would create such chambers at subsea level in order to isolate the under water part of the pipe in a dry "bubble" within this structure to repair it.
- effie 11y ago> * isolate the under water part of the pipe in a dry "bubble" within this structure to repair it* Is that even possible? How would one isolate big pipe under such great pressures?
- DyslexicAtheist 11y agoit is possible: https://en.wikipedia.org/wiki/Hyperbaric_welding https://en.wikipedia.org/wiki/Hyperbaric_welding there are many reason one might want to consider it but usually it is easier to do a quick fix with a wet weld and then plan on a bigger project to get the structure out of the water. only when this is too costly or impossible would they do a hyperbaric weld.
- mchahn 11y agoThe golden gate bridge and many others were built by working in dry "bubbles". An inverted dome on the sea floor was filled with air so the workers could work on the seafloor pretty much the same as on the ground outside. I don't know how they worked under that air pressure. I guess they had to decompress like any diver.