2 ms·
> Some of those things would be great, but controlling lights with Iot? Why? Aren't we solving a problem that doesn't need to be solved? Try installing new lig
by bsder 11y ago
> Some of those things would be great, but controlling lights with Iot? Why? Aren't we solving a problem that doesn't need to be solved?
Try installing new lights and switches in your house sometimes and come back and ask that again.
Not to mention, why do we want 120/240VAC to the controls rather than low voltage DC (less shock risk, less fire hazard, etc.)?
This is even more desirable in office buildings.
- 0xffff2 11y ago>Try installing new lights and switches in your house sometimes and come back and ask that again. I've installed plenty of lights and light switches... I still don't see the problem. Either you have the requisite knowledge to do these things, or you hire an electrician who does. Furthermore, no fancy IoT device is going to remove the basic requirement for running wires to the light socket and (semi-optionally) from the socket to a switch. This is fine because it only has to be done once when a space is built. I would much rather have simple and reliable wiring done once when my house is built than have to buy new light switches every two years because my old light switch is obsolete. >Not to mention, why do we want 120/240VAC to the controls rather than low voltage DC (less shock risk, less fire hazard, etc.)? Oh come on. the shock/fire risk of a properly installed light switch is indistinguishable from zero.
- dragonwriter 11y ago> Not to mention, why do we want 120/240VAC to the controls rather than low voltage DC (less shock risk, less fire hazard, etc.)? Because its simpler, and therefore both cheaper and less failure-prone, to run the actual power to the device through the switch. We've had alternatives with a complexity cost for a long time; they are rarely preferred because the complexity cost is rarely justified. IoT provides more alternatives with complexity costs, but doesn't really change the basic reality for most light switches.
- dragonne 11y agoI just installed new switches (and receptacles) throughout my house. It wasn't difficult. The system is pretty simple, and it's marvelously stable---my house was constructed in the '70s, yet all of the new components fit into the same boxes as the worn out ones they replace. This is great! Not to mention that the whole project has cost just a few hundred dollars, and the results will last decades. Why would I ever want my house to jump on the high tech upgrade treadmill?* *Call me back when you can sell me robotic chicken legs for my house. That would be awesome.