3 ms·
I had no idea the 555 chip that we use today, is the same as it was in 1970. I would have (incorrectly) guessed that as time went on, that it would have underg
by ghshephard 11y ago
I had no idea the 555 chip that we use today, is the same as it was in 1970. I would have (incorrectly) guessed that as time went on, that it would have undergone improvements/revisions as technology improved.
- kardos 11y agoJust before the conclusion he addresses that; there was a revised/improved version in 1997 that was a commercial failure. Presumably due to the 555's ubiquity.
- kens 11y agoWell, there are lower power CMOS versions of the 555 available.
- Animats 11y agoA 555 timer chip can deliver 200mA at the output, so it can drive small lamps and relays directly. The output load usually dwarfs the current used for timing. So, for most applications, a lower power version is pointless.
- swamp40 11y agoThe CMOS version helps quite a bit when the 555 is configured for monostable or bistable mode.
- ajnin 11y agoI doubt that most applications of the 555 are driving relays and lamps, it probably is mainly used to generate timing signals. But that's besides the point, the low power versions can function with low voltages, allowing to power the chip with a single 1.5V battery, which would be impossible with the standard version, so it's far from pointless.
- krivx 11y agoAny re-spin will cost money (and a lot of it). As technology improves, the old processes usually become cheaper too.
- arbuge 11y agoAnalog chips can be real cash cows. Unlike digital microprocessors, a successful design can last for decades without any change in process node. You still get some really old process nodes being used on the analog side because they're still functional today. Power applications in particular need larger transistors for sourcing and sinking large currents. Smaller process nodes don't help much for many of those applications.