2 ms·
I'm too lazy to look up numbers for the Kintex-7 part in question, but I'm almost certain you're wrong on this. A block RAM is a big chunk of die, and there ar
by ajross 11y ago
I'm too lazy to look up numbers for the Kintex-7 part in question, but I'm almost certain you're wrong on this. A block RAM is a big chunk of die, and there are comparatively few of them to go around. A LUT is a tiny object (comparable in computation power to 10-50 dedicated transistors) and there are hundreds of thousands of them on the FPGA.
I'm willing to bet lots that 4/n_block_ram > 308/n_lut.
- ajross 11y agoYeah, I went and looked up. The details are hairy, becuase Xilinx. But a KC7K410T part, which is roughly their mid-range offering has 63550 slices, where IIRC a slice has two LUTs (pay no attention to their "logic cells" number -- that's a normalized thing scaled so as to be linear with the old 4-input LUT design from long ago) and 28620kbit of block RAMs, where each block is 36kbit. So that design uses 308/(2*63550) =~ 0.2% of the logic resources on the FPGA, but 4/(28620/36) = 0.5% of the RAM. Not nearly as imbalanced as it sounded to me originally, but still: the LUT numbers are spun by more than a factor of two. The design is more closely equivalent to "640 LUTs". Which interestingly is very comparable to the equivalent transistor count on the original part from Intel.
- abortz 11y agoYes, you were correct. I was working from the bulk stats on the chip and mixed up Kb and KB ;-)
- deleted 11y ago[deleted]