3 ms·
Is there any reason to use PIC instead of ARM at this point? You can get similarly priced dev boards for Cortex M0 microcontrollers.
by foldr 11y ago
Is there any reason to use PIC instead of ARM at this point? You can get similarly priced dev boards for Cortex M0 microcontrollers.
- szczys 11y agoI always think you should start out learning 8-bit micros like PIC or AVR. The datasheets are short enough you can conceivably read the whole thing. This gets you some instinct on what peripherals a micro should have, how to look up their functionality, how to troubleshoot when they don't work, etc. There's a much higher bar for getting everything working on an ARM controller (ie: did you turn on the peripheral clock before trying to drive that pin?). But I agree, once you're initiated you should prototype everything on a 32-bit micro and then port to smaller or more cost effective chips once all the functionality is established.
- foldr 11y agoThat's a fair point. I started with AVR myself and I can imagine that I might have gotten pretty frustrated if I'd tried to jump straight into ARM. As far as cost-effectiveness is concerned, there are some very cheap cortex M0 chips out there now (e.g. http://www2.mouser.com/ProductDetail/STMicroelectronics/STM32F030K6T6/?qs=%2fha2pyFadujR%2fWSfahMbfqNxy8AOR702lobnZPPAgDjioxyhIVrlUw%3d%3d http://www2.mouser.com/ProductDetail/STMicroelectronics/STM3..., http://www2.mouser.com/ProductDetail/Cypress-Semiconductor/CY8C4013SXI-400/?qs=sGAEpiMZZMtOXy69nW9rM4zhsIgo0l9Hi%252bMw%252bJnLl%2fosN3n16WjTMw%3d%3d http://www2.mouser.com/ProductDetail/Cypress-Semiconductor/C...). At least in the case of the AVR chips, you have to go to the low-end ATTiny's before there's any significant price advantage in bulk.