7 ms·
The design of Britain's wall sockets
- blackguardx 11y agoIt isn't 1930 anymore. You can't use past electrical systems as an argument of why your nation has the best plug.
- mmagin 11y agoAside from the fact that ring mains should probably be eliminated, and it's hard to trust cheap appliances to have properly safety-rated fuses in the plugs today, I don't see what else has changed.
- blackguardx 11y agoThe UK doesn't have safety laws? Or are you buying everything from Alibaba? In the US, a UL listed product will be safe.
- mmagin 11y agoWell, I'm in the US, though I think the UK plug is great. I've found tons of products even sold on amazon which are not UL listed. And most consumers don't realize how bad these things can be.
- blackguardx 11y agoA lot of cheap stuff sold on Amazon is just stuff relisted off of Alibaba for a nice profit. In the US, UL compliance is voluntary for insurance reasons. If you go to Walmart or equivalent, most or all things will be UL listed.
- walshemj 11y agoWhy? what solution would you replace it with?
- DanBC 11y agoThe cheap tat sold on ebay is often terrifying if you're using UK wiring.
- rwmj 11y agoTo be fair, there's nothing in the Part P regulations saying that you have to have a ring main. When I had my house rewired, I had the electrician put in radial circuits for the new wiring, so at least half of my outlets are now in a star topology.
- vetinari 11y agoWhy fuses in the device? Shouldn't you have RCCBs in your installation?
- rwmj 11y agoIn new installations, you have both.
- deleted 11y ago[deleted]
- rjtobin 11y agoFor what it's worth, Ireland, Hong Kong and Singapore also use this socket type (among others). As someone who grew up with these sockets and moved to the US, I have definitely found the British type to be far more robust. The sockets in my US apartment have terrible grip, with my laptop charger often sliding out, which certainly soundly happen with the British style.
- CapitalistCartr 11y agoCheck the receptacles. They are probably worn. Replacing them with better quality ones will solve that problem. New construction uses cheap crap, GE, Leviton, Eagle typically. Pass & Seymour,Hubbell,Bryant are examples of premium brands.
- tragic 11y agoYes, but we Brits don't need receptacles. This this problem doesn't arise. Land of hope and glory...
- osullivj 11y agoI went to East Africa for the first time in 2013 and was surprised to see British style plugs on Zanzibar. But how could it be otherwise, since electricity would have been installed under British rule in the first half of the 20th century...
- mmagin 11y agoIt's a good subject, but the article neglects that the reason for the fuse is the rather high current "ring main" which was a copper-saving measure. If you don't need the fuse in the plug, the Schuko plug is pretty nice too.
- nrr 11y agoHonestly, as far as mains connectors go, I'm a huge fan of Schuko for two very big reasons: There's no polarization, so you get away from that faux-safety reasoning behind "well, neutral should never be hooked up to a switch" nonsense with non-fixed equipment. This extends too to equipment with faulty designs, like toasters lacking double-pole switches. It should really go without saying that you should always unplug the device from the wall if you intend to service it. In addition, Schuko separates the electrical connection from the mechanical connection. This has the obvious benefit that a failure in either won't become a safety concern. Readers from the US will likely understand why this is huge in the context of things like wall warts. (;
- ackalker 11y agoExactly. The high current, if combined with unevenly split loads, improperly installed or maintained wiring, excessive use of spurs etc. can actually mean a greater risk of (fire) damage due to overload compared to 'star'-like circuits carrying less current per segment. https://en.wikipedia.org/wiki/Ring_circuit https://en.wikipedia.org/wiki/Ring_circuit has some of the gory details.
- lowmagnet 11y agoThe attached video explains the ring main. Also, modern overhead lights in the eu switch with low voltage to the switch, further decreasing risk and copper use as a thinner gauge could be used.
- untog 11y agoAgree with everything in the article, but one downside: it really, really hurts to step on one. US plugs can't really ever end up with the prongs facing upwards when unplugged, whereas UK plugs are extremely likely to.
- labster 11y agoOP mentioned that in the very last word of the article. https://en.wikipedia.org/wiki/Caltrop https://en.wikipedia.org/wiki/Caltrop
- cfcef 11y agoAre these advantages reflected in electrocution and house fire rates?
- VLM 11y agoElectrocution related to the plug happens too rarely to be statistically analyzed. This comes up in the parallel infinite arguments about 120 vs 240 volts, and 50 Hz vs 60 Hz. In both countries more than half of electrocution deaths are pretty horrific overkill industrial accident or crane vs power line where the difference between two million times too much power flowing thru the body vs four million times too much power don't have much of an effect on the end result. Likewise a lot of home deaths need correction for alcohol and stupidity.
- wereHamster 11y agoIsn't stupidity exactly what this plug is trying to solve? A toddler is stupid, there is no reason to allow him to electrocute himself. Darwin awards can be handed out to adults, but not to small children.
- DanBC 11y agoPublic Information Film: Fix Things Properly. https://www.youtube.com/watch?v=5N0ATdDdwKg https://www.youtube.com/watch?v=5N0ATdDdwKg
- cfcef 11y agoAre these advantages reflected in electrocution and house fire rates?
- sandworm101 11y agoSorry. It's just too big. Electrocutions and fires from plugs are not widespread in the US/Canada. The UK plug is a solution for a dead problem. There is no practical need to continue with plugs bigger than many of the devices they power.
- maaku 11y agoSurvivor bias.
- walshemj 11y agoUk is 240V 13A which is a bit more powerful that the 110 v Us system.
- sandworm101 11y agoLooking around my place, I don't see any devices that would care. Short of heat devices like kettles and dryers, everything can be run on 110v/15a. So if voltage is the only reason for keeping those brobdingnagian plugs, that too should be revisited.
- CapitalistCartr 11y agoIn the USA, most wall circuits are 120v, 20 amp. Kettles, hair dryers, irons run fine on this, typically 1200-1500 watts each. Clothes dryers, which we are in love with, are a 240v, 30 amp dedicated circuit.
- sandworm101 11y ago>> most wall circuits are 120v, 20 amp. The circuits yes, but the outlets/plugs are generally 15a. There are many hospital/industrial grade plugs that are 20a non-continuous, but anything that requires a steady 20a will have a strange t-shaped plug you will never see in a residential setting. If you want 20a most go with twistlock plugs, which are standard in the film/tv/live entertainment industry.
- ryall 11y agoBritish plugs have always reminded me of "Fisher-Price my first power socket". It's amazing to see for example, an iPhone lightning adapter, a design iterated upon to be ever smaller and sleeker, attached to this ham fisted plug on the other end.
- deleted 11y ago[deleted]
- sathackr 11y agoMany US plugs are now designed with a guard, such that both main prongs must be present before the socket will open and allow either prong to enter (sticking a fork in one side won't open it). Voltages present at outlets in the US is also half of UK (and most of the world, I believe). Under most circumstances, it is not hazardous. It doesn't feel good to be hit with it, but it generally will not kill you or cause permanent damage. Notice I said most circumstances. There are a few things that can make even lower voltages lethal, such as the presence of water, a person with existing cardiac issues, or a small child, for example. It appears also that the half-insulated conductors would present less surface area for contact with the mating outlet, possibly increasing resistance, which could be a problem with a high current load. Or is the mating outlet somehow designed to mitigate this? My main complaint with the outlets in the USA is the contacts in the receptacle lose their grip over time, sometimes to the point of not even making connection with the inserted plug. Under a high-amperage load, this causes the outlet to heat up(due to increased resistance), even when the load is below the outlet's rating.
- mindslight 11y agoI believe these "tamper resistant" receptacles are actually required by electrical code, because apparently the NFPA has solved all the real problems [0]. A socket that sometimes decides to not "open" and bends up the plug's prongs is a terrible idea. And being able to stick in bare wires or test probes is a feature. Contact mating happens at a few individual points, so the total area probably doesn't matter as much for conductivity. [0] See also AFCIs, which greatly increase the cost of a circuit, leading to fewer circuits with more load on each one. Furthermore, each breaker is now running who-knows-what closed software. Somehow, an upgradability requirement was left out of the mandate.
- sathackr 11y agoI believe you are correct, for new construction. Yes, thankfully we have the NFPA. Interestingly, I just attended a high-angle rescue course last week, taught by a highly trained firefighter with more than a few actual rescues under his belt. He explained that for he and his collegues, NFPA was generally agreed to be an acronym for No F*cking Practical Application. Whenever practical, I avoid the tamper-resistant outlets. Many times just getting them to accept a plug is a challenge.
- rogerbinns 11y agoIt also seems like British wall sockets have switches on the wall itself. It seemed pervasive to me, but I don't know if that is a law, standard practise, or just luck. However it is great because you can always turn something off at the wall, without having to remove the plug from the wall. I'm sure that repeated unplugging in situations without a wall switch cause more problems for electrical safety/wear and tear.
- lowmagnet 11y agoI love the integrated switch on the wall as a concept. I'd love to switch off my microwave between uses because its VFD and internal clock being constantly on makes little sense to me. This sort of draw would be an impediment to an off-grid or hybrid power system, constantly draining the supply.
- jhallenworld 11y agoWell this is the new UK standard from 1947. Before that was the considerably less safe type D plug.. still in use by former colonies.
- drfuchs 11y agoThey barely fit in a suitcase, so they're completely unsuitable for a nomad lifestyle (including jet-setting professionals). If they were at least flat, you might argue for them, but they're just a honking big cube, more or less.
- dangravell 11y agohttp://www.themu.co.uk/ http://www.themu.co.uk/
- drfuchs 11y agoDown-voted? Almost anywhere else in the first world you travel from the US, the required adapter is about the size and shape of a matchbook, and easily slips into a side pocket of your roll-on bag or laptop case. For these UK monstrosities, there's no such hope, so you have to put them in the main body of your roll-on, and because of their 3-D nature, they interfere with the normal bin-packing of shirts and pants. Try it some time; I'm speaking from experience. And if you want to take two, you're really screwed.
- deleted 11y ago[deleted]
- Maken 11y agoI fail to see how it has any security advantage over the continental types E anf F.
- bsimpson 11y agoI don't see many advantages over the Schuko plug, used in most of Europe: https://en.wikipedia.org/wiki/Schuko https://en.wikipedia.org/wiki/Schuko The outlets are recessed, so you physically cannot touch any of the pins while they are engaged. For the same reason, ground is on the periphery of the plug and engages before the pins make contact. The Schuko plug and outlet are designed to prevent you from shocking yourself while still being a reasonable size and aesthetically pleasant. The safety shutters mentioned in the video are standard in Schuko outlets in some countries. It's great that they thought about safety when standardizing the design, and interesting to see precisely which decisions were made and why. However, "Best On Earth" is a bit hyperbolic for a video that makes no mention of a more popular design that embodies all the same safety features (save for the in-plug fuse) in a more convenient form factor.
- Tenzer 11y agoOn the topic of the Schuko plug, I never really understood why there had to be that many variations of it. Being from Denmark, I have more often than not had problems with the ground pin obstructing me from using a Danish plug in other countries. It has often times lead me to either saw off the ground pin, or replace the plug with a two-pin connector without the ground pin - in both cases decreasing the security of the plug for accessibility.
- fanf2 11y agoThere is no degenerate 2-pin variant of the UK plug to compromise the safety of unearthed devices.
- swingbridge 11y agoIt's a nice story, but in modern times it's massively over engineered and really not practical. I get that the voltages are higher but even that is a bit silly. In many ways the US system makes a lot more sense. 110V for most things and then 220V only for things that really need it (electric dryer, oven and such).
- aurelian15 11y agoWell, in Europe we have 220V rated at 16A for most things (including electric dryers), and a 3-phase connector with up to 400V @ 32A only for things that really need it (oven) [1]. The higher voltage allows for less bulky connectors, cables and electric kettles which heat water in a reasonable amount of time. And honestly, the European systems (Schuko [2] and the UK plugs) look a lot safer than their US counterparts. [1] https://en.wikipedia.org/wiki/IECEE https://en.wikipedia.org/wiki/IECEE [2] https://en.wikipedia.org/wiki/Schuko https://en.wikipedia.org/wiki/Schuko
- ramgorur 11y agothe main problem with 2-pin US NEMA-1 plug is its asymmetry of the blades, they have exactly the same thickness but with different width, I often make a mistake when I try to plug it in, if you rotate the plug and if you push hard, the plug fits in but the blade gets damaged. Australian ones are better, they have thin blades but wont go into socket if you rotate the plug.
- kennu 11y agoI like extension cords that include both 230V and USB sockets, so you don't have to use power adapters for every device. Makes me wonder if electrical infrastructure could some day be updated to match modern usage patterns. Here's an example picture, I'm sure these exist in all countries: http://www.airam.fi/fileadmin/tuotekuvat/vapaa-aika/2441532_jatkojohto-3-USB_k_md_web.jpg http://www.airam.fi/fileadmin/tuotekuvat/vapaa-aika/2441532_...
- Theodores 11y agoSome friends with camper vans were recently discussing whether to get 240v for their respective vans. The guy at the garage wasn't recommending it because of a lack of a 'use case'. I would like to see the UK ring main revisited to provide a useful USB power ring main where devices can negotiate current demands, e.g. to power a laptop without dropping the voltage for anything else plugged in to the 5v DC. How would a modern day government set a standard for that?
- ry_ry 11y agoThe UK model is the most painful plug to stand on, due to it's propensity to lie 'prongs up' and the particular arrangement of said prongs. This is a deliberate and oft misunderstood feature of this plug. In the event of an invasion standing orders are for every British citizen to cut the plugs off their appliances and scatter them in the streets as makeshift caltrops, delaying the enemy advance and crippling any soldier unfortunate enough to have removed his shoes.
- mattkevan 11y agoI'd love to see something like USB become the standard for supplying power. It would work for pretty much everything except heavier appliances, and remove the need for most things to have their own adapter. It would be much more efficient, and as a Brit, kinder on the feet. And electrical saftey isn't what it was: a friend has an electric train set from the 30s which runs directly from the mains. A 60 watt lightbulb is wired up to the tracks to indicate when they're live, and the sparks and ozone smell when it's running is something to behold.
- Cerium 11y agoDoes the design improve surveillance security? Looks like the insulated plug prongs and the ground pin enablement features would help resist server plug capture devices for seizing servers while powered up.