3 ms·
They might work, but if, as I do not rule out, the machine uses dead reckoning (i.e. it doesn't use its cameras to detect when a face is oriented at exactly 90
by Someone 11y ago
They might work, but if, as I do not rule out, the machine uses dead reckoning (i.e. it doesn't use its cameras to detect when a face is oriented at exactly 90 degrees, but just rotates a face by what it knows to be 90 or 180 degrees), I think it would be difficult to properly set up the machine.
You would have to place the suction cups exactly at the center of each face, cannot allow one cup to suck a bit harder than another, and have to make sure all faces are very close to being perfectly flat in the starting position.
Edit: also, if those suction cups slip, I guess you will be looking at more Rubik's cube parts than you thought existed.
- vectorjohn 11y agoI don't think you need all that. They use stepper motors so they do indeed turn exactly 90 degrees. What they would have to worry about is the suction cup not sticking perfectly. E.g. after a 90 degree turn if the momentum makes that part of the cube slide a little when they try to stop, it will introduce a small error. Maybe turning other parts of the cube would correct it.
- JoshTriplett 11y agoI've seen other Rubik's cube solvers that handle this by heavily lubricating the cube, so that if the machine attempts to turn it without perfect alignment, it'll just slip into alignment rather than snapping. See https://www.youtube.com/watch?v=X0pFZG7j5cE https://www.youtube.com/watch?v=X0pFZG7j5cE for an example solver.