3 ms·
First, there are things like buildings and infrastructure, and there are mechanical parts, devices, etc... By example could work for some things today. Often,
by ddingus 11y ago
First, there are things like buildings and infrastructure, and there are mechanical parts, devices, etc...
By example could work for some things today. Often, template or start parts are the basis for those. And that's been going on, like you say, for some time. We don't actually need CAD to do that, though we do have a high communications burden without it. We could invest in those comms, dumbing down a lot of stuff too.
But, there is no way in hell that sweet spot can replace design and engineering. The liabilities alone keep it off the table, and the problem space is absolutely huge too.
As another person here said, "not in my lifetime."
You know, I worked with some people who build yachts. Lots of old world skill in that building. They can, if desired, just build a nice boat with nothing more than the tools and materials in the shop.
They bought CAD from me that day, and the owner expressed what you are here too.
Turns out, good design and engineering makes better boats in both the subjective sense and objective performance, physics sense. And communication allows for faster, less error prone boats too.
You are describing a distant, potential future. We have no where near the level of tech, not development as people needed to actualize that.
CAD is part of that journey. With it, advanced products, structures, etc... are all possible, but the work involved is still insane.
I've seen and been a part of the development of systems that do this, and even on trivial parts there is a whole lot to be accounted for.
The bars we have in place, that differentiate engineering from design, permits to build, geological studies and other various impact studies all regulate the building of things that people depend on and that they must trust.
We have those in place for really good reasons, and one of those is the fact that we just don't have mastery as a species. Not yet.
All I here is, "dang, it costs money to do it right", and "why can't I just copy my neighbor?"
The answer lies in the complexity of the world and the dynamics of the people here in it.
Nice vision, but good luck with that.
For now, I suspect the more productive answer is to continue making CAD smarter and more accessible to ordinary people. We don't yet live in a Lego brick world, and I suspect human creativity will drive that being the case for the forseeable future.
- brudgers 11y agoThere's a great deal of cultural and economic history attached to yachts. So lets look at web pages. An end user with no technical training in networking, graphics engines, operating systems etc. can generate sophisticated artifacts with minimal input from a computer. Sure, it's not a "yacht" but its functional. I've been in AEC for almost 30 years. I've built, designed, and regulated buildings through three recessions. What has kept software from eating design is the economics of piece work. There's no way to scale except linearly and the cyclic nature of the industry puts a natural cap on that. Typist used to be a career.
- ddingus 11y agoI've had that same dialog and result across a wide variety of diciplines. The yacht people came to mind from the comments here. I'm not really going to equate Web pages in the way you are attempting. The parallels are far too coarse and fail to be inclusive enough to make for meaningful discussion. The idea of, it's worked before, so do it again is a good idea. But there are a lot of limits to doing that safely that are just not being considered here. In a vacuum, "I need this thing", or even, "this building" doing that can make sense. I know a guy who has applied roughly these kinds of ideas to things like parking garages. My experience is more electromechanical, but there are strong parallels. I will agree we may be closer on the AEC side of things. Design can often be less of a factor, but there still is all the analysis and verification on significant structures. For minor league things, are we not mostly there? A lot can be done without CAD and that's fine. I will argue effective CAD can still improve on many of those cases. Making CAD accessible still seems to me the better path, and that's due to the fact that we really can't responsibly ignore the process. CAD is a whole lot more than making plans, or defining shapes. There is descriptive and analytic geometry, two cases made difficult to employ on some CAD systems that were simplified to maximize more common use cases. Engineers and designers, who understand how and why one would use geometric methods, pay easily for capable CAD software that delivers great returns to all involved. I also helped with a FAB, where everyone involved wanted to improve on the reams of paper drawings needed to communicate the work. There also needed to be a means to communicate variances from the plan too. Stuff happens, and is it cheaper to go with it, or rip it out and do over? I modeled the whole FAB, and output the result as a 3D view, measure, section, etc... dataset. The guys could go on site, locate themselves and then see the work, to scale, measure, etc... they could also send back differences and errors in 2D and get fresh models to work from. And we took a TON of cost out of that one. Pre construction bids were much closer to realities, there was far less error, far less overall comms between everyone, etc... I've been on a few other projects that are similar and can't say much. There are a few people in the world out there who are applying a lot more of the mechanical CAD capabilities with great results. Because that was done in CAD, I have a ton of options. It's a great template for another FAB. I could add rules and constraints and limits to enhance that too. I have, as an exercise and now know I could make an 80 percent fab start model... the dataset is proprietary, so no sharing, but recent advances in CAD API options as well as how and what parametrics and rules can be input bring a lot to the table. Yeah, making prtery stuff is a distraction. Management and culture problem. We have an education problem too. The things I mention here are mature, work well, but just not taught to the degree they should be. There is huge industry inertia holding things back in the AEC space that does not exist in the same degree in, say mechanical and entertainment. Entertainment and games have few human impacts, and we do see computational means being applied. Some of that has trickled into mechanical too. More will come. And, it's not so practical to express these things in a purely computational way. Honestly, the barrier to entry on that is even higher! If you dislike vendor pricing on CAD, the sticker shock on those kinds of datasets will be brutal. Open ones won't be trusted, they will need to be evaluated, and closed ones will work, be supported, liability compliant, etc... Even the basic input to a computational type system will need to be a sort of CAD, due to the difficulty we have in communication geometry, sans visual means. Should that system result in something viable, nobody would ethically bill with it, until after a professional does an analysis. You mentioned scaling... well, applying high end CAD to stuff like this, and doing it the way the mechanical people have done it for years can scale! It's the CAD that can bring the scale to the table. It's been going on for years and we ate at the point of digitally simulating entire vehicles, factories, etc... and that stuff brings us better, faster, less expensive things and the automation needed to make them too. 2D rats nest drawings are going away. Delivering robust 4d and 3d to people is pretty awesome and a smaller planning, design, compliance, engineering group can do the work of many people and across multiple projects too. Honestly, I think a lot of what you are getting at exists, and CAD enables it. Human input can be distilled down to a Web page. Design rules, template parts, intent and other compute driven inferences take people out of the equation now too. In the mechanical case, the ongoing changes continue to add a lot of value. It's not just a business model. If anything, the AEC side of things could learn a few things from the mechanical people, who by the way, do take liberally from appropriate AEC ways and means where they make sense. Both teams could benefit from software ways and means, and I know of at least one new, free to use on your phone or computer cloud type CAD tool doing exactly that. There is a really ugly gap between small CAD, low complexity, and major efforts involving a lot of integrated systems. Design reuse in this space holds a lot of value potential. It absolutely will not displace high end, real CAD (Siemens, Dassault), but could very well dominate a lot of the market, should it end up out there, possible for mortals to use, etc... On a vendor specific note, Auto desk finally sees this and is building some nice stuff. They may be like AMD, always a bit behind for failing to build when others did, but maybe not. We shall see over the next 10 years. The position of drafter or CAD jockey is on the decline. CAD will eventually settle into something most people can and want to do. Maybe reaching that point will also mean enough days and expertise being captured to take steps in the direction you find appealing. It's gonna be a bit of a wait...