3 ms·
>Bullshit Well thats not nice. Speeds will vary greatly depending on whether proprietary booster tech is in use, which in turn will depend on the combination
by Havoc 11y ago
>Bullshit
Well thats not nice.
Speeds will vary greatly depending on whether proprietary booster tech is in use, which in turn will depend on the combination of hardware both on the sending and receiving side.
oh and while we're on the topic of bullshit (seeing how you were so blunt to go there) - signal levels are measured in decibels, not nW. nW is a measure of power fed to the antenna. Your comment is about as plausible as someone claiming their car is 40 gallons fast.
- dogma1138 11y agoTransmission power in milliwatts (mW) is directly convertible to decibel-milliwatt (dBm). This is arguing if your car is doing 1 to 60 miles or 1 to 100km in 4.3 seconds. For the most part you measure transmition power in mW and received signal strength in dBm.
- zaroth 11y agoRSSI -- Receive Signal Strength Indicator -- is reported in dBm, which is a log-scale unit of watts. +20dBm is approx. the max transmit power for WiFi, and equates to 100mW. 1nw is eqivalent to -60dBm which is a pretty decent signal strength for WiFi, but won't provide max data rate. By comparison, the minimum power to operate at 1Mbps is about -98dBm. Then again, receiving at 60mw (+17dBm) would overdrive any of the WiFi devices I ever tested and path loss of just 3dB (assuming +20dBm transmit power) is not achievable over the air, even with a near-field antenna. Keep in mind many devices actively tamper with the RSSI value reported up through NDIS, so while it's possible for a card to report it is receiving at +17dBm, unless you have hard-wired the hirose connectors between AP and STA it's not actually the case. Nor would a receiver work very well with so little path loss in any case, it would be completely over-driven.