3 ms·
Check the amperage of your power-supply. I had the same problem when I had a questionable power supply that was providing insufficient juice. I must have gone t
by sangnoir 11y ago
Check the amperage of your power-supply. I had the same problem when I had a questionable power supply that was providing insufficient juice. I must have gone through 4 SD cards - the problem went away when I switched to a 2-amp transformer/adaptor.
Another thing you might want to check is how well ventilated your Pi is, high temperatures might also toast cards.
- geerlingguy 11y agoThis. Almost every time I've had any corruption problems, it was preceded by the little under-voltage rainbow icon appearing. Also, if you have things plugged into USB, consider setting the usb_max_current setting to 1 in /boot/config.txt
- Albright 11y agoWhat is the "under-voltage rainbow icon?" Is that on the Pi itself, or in some program?
- cnvogel 11y agohttp://i.imgur.com/673Qw1i.jpg http://i.imgur.com/673Qw1i.jpg As far as I know there's a task running on the "GPU" (where quite a few things are assisting the ARM CPU showing the screen, playing audio, actually bootstrapping the ARM, ...) that provides this icon as a feedback to the user.
- Albright 11y agoAh, hmm. So I guess you don't see it if you're using it headlessly… that's mostly how I've tinkered with my Pi.
- dspillett 11y agoThanks for the hints. I did have trouble running a USB drive that worked everywhere else off them, so perhaps power is the problem and that not working was due to it being more hungry and other drives and the Pis not having enough amps spare to hand over. This wasn't filesystem corruption though: the SD cards never worked properly again so there was presumably some physical issue rather than just damaged data. I can't say I've noticed any part of them being at all warm either in general running or after a card had died so if it is heat related the heat was temporary (and they aren't where things like direct sunlight or near-by household heating could be a variable). I'll check the power supply at some point, but for now they've both been running smoothly 24/7 for months so I'm happy with the NFS solution for the time being.