4 ms·
That cable hack job. :twitch:
by grendelt 11y ago
That cable hack job. :twitch:
- edent 11y agoHey, it worked! But, yeah, I need to learn how to solder
- Relys 11y agoIf you really don't feel like doing through-hole soldering to the board you could at least use: https://en.wikipedia.org/wiki/Crimp_(joining) https://en.wikipedia.org/wiki/Crimp_(joining) https://en.wikipedia.org/wiki/Electrical_tape https://en.wikipedia.org/wiki/Electrical_tape I just don't want to see you burn your house down! :p
- hamitron 11y agohttp://makezine.com/2012/02/28/how-to-splice-wire-to-nasa-standards/ http://makezine.com/2012/02/28/how-to-splice-wire-to-nasa-st...
- miahi 11y agoI saw a lot of this splicing type in old military radio transceivers ("portable" for a given value of portable - usually some kind of backpack weighting ~30Kg - and the batteries were in another backpack). That splicing works for solid-core conductors, but it doesn't have the same strength on stranded wire, as it is more flexible. It could work on tinned thin stranded wire (as it makes a kindof-solid wire) but if you tin it then you can just solder it and that's it. The referenced standard[1] also contains the splicing for stranded wire, and some requirements about when and how to use each. [1] http://www.hq.nasa.gov/office/codeq/doctree/87394.pdf http://www.hq.nasa.gov/office/codeq/doctree/87394.pdf
- hatsunearu 11y agoIf you haven't noticed already, you are now aware that the two intertwined wires in the second and third section of that illustration is topologically impossible. It's a pretty darn good technique though, useful when your wire harness is going through some minor tension. Extensively used during our underwater robot build :)