4 ms·
Imo, a built-in wifi module on the Pi0 would have made it massively more attractive. That way it can be put anywhere with just some sensors added. The SD card i
by teekert 11y ago
Imo, a built-in wifi module on the Pi0 would have made it massively more attractive. That way it can be put anywhere with just some sensors added. The SD card is ok, it requires no extra stuff and can even be handy for experimenting, but just adding wifi (which you want in >90% cases if you ask me) means adding a powered hub. Armv7 would have been nice for Ubuntu (Snappy Core or not).
- newman314 11y agoAgreed on a cheap board with wifi capability. It would be nice to have a board stuck in the attic without having to run wires.
- icebraining 11y agoYou don't need a powered hub, just a split USB cable that runs the power pins to the charger and the data pins to the Pi. Example: http://www.amazon.com/Insten-Micro-B-USB-Cable-Black/dp/B005M0ICG2/ref=pd_sim_147_3?ie=UTF8&dpID=41bt11uGOUL&dpSrc=sims&preST=_AC_UL160_SR160,160_&refRID=112E1AH44CX4GTE8MXXF http://www.amazon.com/Insten-Micro-B-USB-Cable-Black/dp/B005...
- jepler 11y agoI would not bet on this without a schematic for the new Zero to check against, or a shipping device to test it on. I suspect that the D-/D+ lines of the PWR port are not even connected to the SOC. The linked cable is probably not appropriate anyway since it is USB 3.0. The 3.0 "B" plug is not compatible with a 2.0 "B" receptacle. Edit: As far as I can tell from this information about the SOC http://elinux.org/RPi_BCM2835_Pinout http://elinux.org/RPi_BCM2835_Pinout there is only one pair of USB D-/D+ lines. I don't see another IC that could act as an onboard hub, so I think it's hardware limited to supporting a single USB port.
- deleted 11y ago[deleted]
- icebraining 11y agoOh, I'm not talking about reusing the Pi power port to connect the Wifi, I'm saying that you could connect the Wifi to the single data USB port, but use a Y cable to connect the VCC/GND lines of the Wifi adapter directly to the charger. EDIT: Like this (the right one is the Y-cable): +--------------+ +------+ | | | WIFI | | Rasp Pi | +--+---+ | | ^ +--+------+----+ | ^ | | | | | | | D-/D+ | | +-------------->+ | ^ | VCC/GND | + + Charger Charger