3 ms·
Well there you have multiple "issues". One part is the wire gauge. You need something like 24awg (its the American system, don't ask me why) on the power pins
by digi_owl 11y ago
Well there you have multiple "issues".
One part is the wire gauge. You need something like 24awg (its the American system, don't ask me why) on the power pins (higher number, thinner wire, iirc). Most use 28 on both power and data pairs.
Then the charger has to actually follow the USB spec, not the very similar Apple one. This means either a microchip that can handle the USB handshake, or a resistor across the data pins at the charger end to signal that this is a charger (Apple has one resistor on each pin, with a slightly different resistance).
Now on top of that you have Qualcomm pushing their fast charge system that involves a chip at both ends, and higher voltage than the 5V that USB normally uses. The higher voltage allows for more watts without upping the ampere (V*A=W, iirc).
Note that the Qualcomm system is similar (but i don't think they are interchangeable) with the USB3 system (the latter can go all the way to 20V, but that requires beefy cables).
Frankly the more i think about it the more i expect to hear about someone getting electrocuted because they mistook their data cable for their dumb laptop charger.