5 ms·
A Superconductor That Works at -70 °C
- Animats 11y agoFor low values of "earth temperature". Apparently, when hydrogen sulfide gas is compressed to very high pressures and cooled to -70C, it becomes a superconductor. That's an interesting physical phenomenon, but lots of materials have unusual physical properties under extreme pressures. Chemicals can be forced into a crystal lattice even when they don't stably bond that way. Still, it's a new data point. Maybe someone will find something that's both stable under standard conditions and superconductiong.
- svckr 11y agoPlus, at that temperature, you can easily keep the conductor cooled with frozen CO2, which is pretty easy to produce / readily available.
- krasin 11y agoThermoelectric cooling ([1]) can reach such temperatures, which will not require any gas consumables. However, it could be more energy-efficient to cool with CO2. I have not done math for that. 1. https://en.wikipedia.org/wiki/Thermoelectric_cooling https://en.wikipedia.org/wiki/Thermoelectric_cooling
- rcthompson 11y agoMost biology labs have a -70C or -80C freezer (or several) in their lab. As far as I know, they work the same way as the freezer in your kitchen. Since they're so widespread, I'm assuming this is probably the most economical way to achieve temperatures of -70C. But that might change depending on what volume needs to be cooled to that temperature.
- StillBored 11y agoFunky refrigerants... The following has an evaporator temp of -96C to -73C, and a condensing temp of -29C. https://www.chemours.com/Refrigerants/en_US/assets/downloads/h53011_Freon23_for_vlt.pdf https://www.chemours.com/Refrigerants/en_US/assets/downloads... If you scroll down in the PDF you can see a comparison with R-503 and R-13, two other low temp refrigerants. But you can't just put that in a normal refrigerator.
- dang 11y agoOk, we put -70C in the title instead.
- TeMPOraL 11y agoThat's a great choice and I applaud going in that direction. It makes HN headlines more trustworthy and, in a way, more interesting than vague ones are (myself I was all like "holy hell!" when I saw the -70 figure).
- ars 11y ago> That's an interesting physical phenomenon, but lots of materials have unusual physical properties under extreme pressures. This is not interesting for its practical applications. Rather, this is interesting for the new science and new ideas it illuminates. By understanding how this works, the ideas can maybe be replicated by other materials that don't require extreme pressure.
- MCRed 11y agoThis is pretty huge. The last major break thru was getting superconductivity in Y1B2C3O at liquid nitrogen temperatures (-200 C) back in the 1980s. I worked in a lab with the discoverer of this phenomena, Dr. Paul Chu. While -70 is still damn cold, it should be achievable a lot more cheaply than having to cool things with LN2, so hopefully-- cross our fingers-- this will lead to the breakout of superconductivity into broad industrial use (and maybe the mainstream consumer market) that people have sought for decades. BTW- while in that lab I used a variation of the meissner effect to design a memory circuit that was theoretically buildable at the time- static RAM that was superconducting. (and basically, the essentials of a transistor were there so logic gates could be built from super conductors, that was the thought experiment I was doing.) Since heat is a major concern in CPUs, the ability to be superconducting (and thus producing no heat) would be a huge boon for computation. Of course initially this wold be at scales much larger than current lithography and thus only for specialized applications. But who knows. With effort the cost of keeping a CPU at -70 should come down dramatically the way battery capacity per dollar has... or dare we hope the way flash density has.
- AnimalMuppet 11y ago> Since heat is a major concern in CPUs, the ability to be superconducting (and thus producing no heat) would be a huge boon for computation. But (if the superconducting transistors worked like current CMOS, which is a big if): While there would be no power draw or heat dissipation at steady-state, there would still be some when gates switched, correct? And if so, you could still wind up with pretty significant heat dissipation...
- aidenn0 11y ago-70C is above the dry-ice sublimation point, though just barely, so perhaps not enough to be useful; another 10C and it really could be.
- DasIch 11y agoThere is no dry-ice necessary. You can cool something down to -70C and lower with a freezer as used in biology or medical labs. Such a freezer isn't even that fancy, they look and afaik work pretty much like the household appliance variant.
- Rexxar 11y agoFor information, this "news" is two months old. One of the multiple articles on this: https://www.newscientist.com/article/dn28058-warmest-ever-superconductor-works-at-antarctic-temperatures/ https://www.newscientist.com/article/dn28058-warmest-ever-su...
- KMag 11y agoNote that hydrogen sulfide is in the realm of hydrogen cyanide in terms of toxicity. (Unfortunately, Wikipedia doesn't have comparable LC50 times for humans, but for H2S we're talking 600 ppm for 30 min and HCN is 357 ppm for 60 min.) We're unlikely to see high-pressure H2S lines running through residential neighborhoods any time soon.
- niels_olson 11y agoFunny, H2S is a natural product of sewage. And on vessels sewage lines are frequently pressurized. Maybe not to your house, but maybe there are some limited uses.
- KMag 11y agoBeing natural doesn't make H2S safe, especially at 1,000,000 ppm under high pressure. There's nothing funny about it. In many areas sewer workers are required to check H2S levels above manhole covers before opening, because it sometimes kills sewage workers. If the sewer smells, the H2S level is probably below 150 ppm. Starting at 100 ppm, H2S begins to paralyze the olfactory nerve and the sewer stops stinking.
- niels_olson 11y agoMaybe I should have said "interesting" instead of "funny". Of course, the reason I know about H2S in sewage is that I was in charge of all the water and sewage piping systems on my first ship. Including safe re-entry and emergency response to leaks. So, yes, I'm quite aware of the hazard presented by H2S. I wouldn't advocate running it residentially, but perhaps in high power low voltage situations like inside a power plant, or major substations, it might make sense.
- knodi123 11y agoHydrogen sulfide is in farts. About one percent, if I recall correctly? "Silent but deadly" indeed.
- 11y ago
- skimpycompiler 11y agoHow come physics can't predict the warmest superconductor?
- analog31 11y agoDisclaimer: I'm a physicist but have no expertise in solid state physics. I remember when the whole high-Tc thing started. My recollection is that the discovery broke what was at the time considered to be the mainstream understanding of superconductivity. And, a more comprehensive and satisfactory theory has not yet emerged. As a result, we're in a sort of tortoise-and-hare race between theory and experiment, where each one advances a bit when the other one catches up and makes a new discovery.
- deleted 11y ago[deleted]
- weland 11y agoDisclaimer: I'm (technically) an engineer, not a physicist, but I took a course on this back in uni, and as far as I can remember, you're correct. The gist of it is that BCS theory, which satisfactorily explains conventional superconductivity, fails to predict the behaviour of high-temperature superconductors, and there simply isn't a better model available at the moment. For any sane individuals reading this, the answer is "We're trying really hard but so far we haven't been able to deduce a formula for the highest temperature." I'm not very optimistic with regards to this ever happening. I remember reading a paper regarding one of the many high-temperature superconductors, BSCCO; it has a crazy crystaline structure, it's quite unlikely that we'll ever come up with an analytical model describing its superconductive behaviour.
- ovi256 11y ago>we're in a sort of tortoise-and-hare race between theory and experiment, where each one advances a bit when the other one catches up and makes a new discovery. So, business as usual ?
- eru 11y agoA fundamental reason is that with current hardware and software large quantum mechanical systems are hard to simulate. So we can't just through a computer at it, to try out all possibilities.
- paulmd 11y agoTo my untrained eye, the Meissner effect appears to be the most obvious connection between the previous high-temperature superconductors and this finding. If intense pressure causes superconduction, then perhaps the Meissner effect is a manifestation of the same phenomenon. If the Meissner effect expels magnetic fields from the material, then perhaps this effect also causes the material itself to be compressed physically in response, or something like that. Disclaimer: I know nothing about superconducting physics, but I did stay at a Holiday Inn Express last night.
- thecopy 11y agoIf we could run a CPU with no heat generated, what limits the clock-speed? The speed of the electric potential-change in the conductors?
- SEMW 11y ago> If we could run a CPU with no heat generated Nitpick: not much heat generated, but not no heat. There are fundamental lower bounds on the entropy increase caused by doing irreversible computations (Landauer's principle), superconductors or no superconductors. TAANSTAAFL: the universe won't let you compute for free. As for what limits the clock speed: for one thing the speed of light - information still has to get from one part of a CPU to another.
- imaginenore 11y agoThis was actually known for at least a year: http://www.superconductors.org/sulfhydr.htm http://www.superconductors.org/sulfhydr.htm
- imaginenore 11y agoWhat do you guys think of these room temperature (and above) superconductors? http://www.superconductors.org/400K_SC.htm http://www.superconductors.org/400K_SC.htm