4 ms·
There is a EU directive on that since december 2008 (http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008R1275 http://eur-lex.europa.eu/legal-content/
by Someone 11y ago
There is a EU directive on that since december 2008 (http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008R1275 http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:320...)
It basically limits standby or 'power off' power consumption to 0,50 W.
The EU isn't afraid to fine companies heavily, so chances are most equipment follows this rule. If not, I guess a few companies are sweating now that people start to question compliance of devices.
I also guess this directive has had implications all over the world, just like the ban of lead soldering in the EU did. once you have spent the money to design a low power solution, economies of scale do not make it worthwhile to keep an second design around for use outside of the EU.
I think 0,5W still is too much, though. With 20 plugged in devices (sounds like a lot, but count them in your house: coffee machine, water cooker, blender, audio system, televisions, computer, monitor for computer, external hard disk, printer, etc.), that still is a quarter of a kWh a day.
Certainly, home automation systems should aim to go way lower per power outlet.
- Karunamon 11y agoUgh, this explains that crap pair of Creative speakers I ordered some time back. The speakers themselves are very nice and sound good, but they have this infuriating habit of powering off if no sound is received for ~5 minutes. (And they don't automatically power back up when there's sound detected) Now it sounds like this was to comply with this inane EU directive. Aren't there some lower hanging fruit to pick like major appliances before hamstringing comparatively lower users like consumer electronics?
- Someone 11y agoThat directive covers about every electronic device, including major appliances such as washing machines, dishwashers, and electric ovens. Also, one could argue that this is more important for the smaller items. Most people will have way more of them, and having, say, a 5W power drain, 24 hours a day, on a €30,— toaster that you use for, rounding up, 1 hour a week, relatively is a much larger waste, and feels way worse than having that same drain on a €1000,— television that you use, rounding down, for 2 hours every day.
- Animats 11y agoSuch devices need a standby power supply, one that delivers a few mA, to drive the circuitry that wakes things up. Or a power supply that goes to an ultra low power mode when its load drops. Both are available.[1][2] They add to the parts count. The cost penalty is minor for a TV, but noticeable for really cheap devices like speakers and wall wart power supplies. This is one of those problems that yields to regulatory pressure. With some pushing, a solution like [2] below becomes standard, and adds about a dime of parts cost to everything that plugs in, probably paying for itself in the first month of usage. Without such pressure, all the crap power supplies don' have it. [1] http://www.ti.com/lit/an/slua116/slua116.pdf http://www.ti.com/lit/an/slua116/slua116.pdf [2] http://www.onsemi.com/pub_link/Collateral/NCP1015-D.PDF http://www.onsemi.com/pub_link/Collateral/NCP1015-D.PDF
- rconti 11y agoAh, perhaps this is why I haven't found "vampire power draw" to be an issue. There's the trope that you should unplug all of your adapters when not in use, but I had a power strip full of 2x Apple laptop chargers, and various USB chargers from various manufacturers, all plugged into a Kill-A-Watt... which registers, effectively, 0 watts consumed over multiple days when nothing is plugged into the adapters.
- mschuster91 11y agoThe reason why you should still unplug or at least disconnect wall warts is because most of them are cheap-ass manufactured and more often than not the CE certifications are faked. End result, happened to a friend: kitty knocks over a powerstrip, an adapter breaks down internally due to impact, causes fire. Thankfully he had a smoke detector.