3 ms·
This is by no means an exhaustive list, nor an authoritative one. Would love to hear other's thoughts on these: - When accelerating, try not to over-extend the
by tremon 11y ago
This is by no means an exhaustive list, nor an authoritative one. Would love to hear other's thoughts on these:
- When accelerating, try not to over-extend the throttle. If the engine is at 2k rpm, you get just as much acceleration from 30% throttle as 100%, at half the fuel cost.
- Release the throttle well before you reach a traffic light/stop sign. Deceleration by engine will cause a smoother stop and gives the traffic light more time to turn green. You spend less fuel trying to reach the stop line, and spend less fuel accelerating again. Bonus points for shifting down while decelerating.
- Keep tires well-inflated and oil levels up. Less friction means less wasted energy on both.
- Choose the highest gear when cruising. Most cars since 1990 can do 50kmh (30mph) even in fifth gear, as long as you don't need to accelerate.
- Drive slower. Most car engines are most efficient around 3500 rpm, which maps to somewhere between 90-110 kmh (60-70mph). Most highways allow for a higher speed. Diesel engines have their optimum at 2000 rpm, or so I've been told.
Of course most of this works best with a stick shift. I've never driven an automatic.
- userbinator 11y agoChoose the highest gear when cruising You can do this for automatics too - you just have to learn where the shift points are and drive at the right speed. Lift up on the accelerator quickly to upshift, press it down quickly to downshift. One thing that I notice easily when riding is when the driver is constantly staying at only a few km/h slower than the shift point, causing the engine to spin faster and consume more fuel than necessary. It often means the car is louder and vibrates more too, so not a good thing overall. This is harder to do for newer models with quieter engines and smoother shifts but older automatics have very noticeable shifts and engine noise to judge whether you're near the bottom or top of each gear. It's very noticeable in larger trucks and buses. Edit: another point I'll add to the list is traffic light phasing - look far ahead and observe the timing of the lights, and adjust your speed so that you're not going too fast (you'll arrive at a light before it turns green) or too slow (it'll turn red very shortly before you arrive). Obviously, you should do this only if traffic permits, but it's a great "trick" (not so much a weird one) when you can get from your origin to your destination at a constant speed with nearly no stops.
- toomuchtodo 11y agoYou can usually get the shift points for a model from its technical manual. Depending on the car, those shift points can be modified as well (using the appropriate software and cable).
- maxerickson 11y agoOn a fuel injected engine, the gas pedal is a power requester more than it is a throttle control. The ECU won't inject excess fuel. At least some manuals with EFI also have power governing to protect the transmission.
- number_six 11y agoI have a CVT transmission and while I'm sure it is very smart I still feel like I could do better with a manual. I don;t like my car vey much, but it is too practical and cheap to change.
- snuxoll 11y ago> I have a CVT transmission and while I'm sure it is very smart I still feel like I could do better with a manual. I don;t like my car vey much, but it is too practical and cheap to change. Is it a actual Continuously Variable Transmission (CVT) or an automatic transmission? There's nothing 'smart' in a CVT since there's gears to shift between, and it's highly unlikely you're going to do 'better' under normal driving since the point of a CVT is to allow the engine to run at ideal RPM's no matter the speed.
- mattlutze 11y agoA CVT has a pair of pulleys with variable ratios, and a big belt between them, to allow the belt to shift between ratios and find the best ratio. CVT has some inefficiencies that can be improved by putting the gear selection process from an automatic onto a manual (with an automated sequential manual gearbox or a "double-clutch" transmission). https://www.fueleconomy.gov/feg/tech_transmission.shtml https://www.fueleconomy.gov/feg/tech_transmission.shtml http://www.nrel.gov/docs/fy11osti/47806.pdf http://www.nrel.gov/docs/fy11osti/47806.pdf
- S_A_P 11y agoICE and Diesel engines are most efficient at full throttle. There have been some tests that show, in certain conditions, that using full throttle to get to speed and then maintaining speed is a more efficient way to drive than gradual acceleration.
- rconti 11y ago> - When accelerating, try not to over-extend the throttle. If the engine is at 2k rpm, you get just as much acceleration from 30% throttle as 100%, at half the fuel cost. Well, that's obviously not true.