2 ms·
Sounds like you have a bad battery or something like that, which is causing the battery meter to be inaccurate and is thus interfering with the rest of the proc
by mikeash 11y ago
Sounds like you have a bad battery or something like that, which is causing the battery meter to be inaccurate and is thus interfering with the rest of the process. To safely sleep/hibernate your machine the system has to have a pretty good idea of just how much energy is left in the battery, since it has to initiate the process before the battery goes completely flat. On a properly working machine, you should get all the way down to 0%, and then it will forcibly sleep if you don't do it yourself.
Have you tried an SMC reset? That's the low-level whatnot that controls the battery, and sometimes it can get confused.
- code_sterling 11y agoYea, I've never had issues like that, and I've used Mac's exclusively for since they came out with the unibody.
- rcthompson 11y agoI tried an SMC reset today, and it changed nothing. It still just dies right around 20%. (At least, I think I reset the SMC. There wasn't any obvious feedback confirming that I had done so.)
- mikeash 11y agoYeah, the SMC reset procedure is pretty opaque. Sounds like you're probably at the point of needing a repair. Hope you're in warranty, although given how these things go I imagine you're probably not.
- rcthompson 11y agoNah, I've had it a few years, so it's out of warranty. I'll probably have to replace the battery eventually. I don't mind if the battery's capacity is decreasing, I just want it to auto-sleep before the battery dies. Maybe there's a way to set the auto-sleep threshold to 25% or something?