3 ms·
For a long time now race bikes have run "regressive rate" rear suspension linkages. The geometry of the suspension is set up so that when you've got the ~2G of
by bigiain 11y ago
For a long time now race bikes have run "regressive rate" rear suspension linkages. The geometry of the suspension is set up so that when you've got the ~2G of force vertically down on the rear suspension (from the bike's frame of reference) that a ~60degree lean angle turn implies - the effective spring rate is significantly less than when the bike is upright and the suspension is riding higher under only 1G of load. While it can't resolve the 90 degree degenerate case, it's easy enough to tweak the geometry so you've still got known and desired levels of "suspension working" at 60ish degrees. (Handwaving away the complexities of component flex and stiction - which really is black magic.)
Note this is opposite to what many road oriented motorcycles use - progressive rate springs and linkages are often used to allow "more supple" suspension around normal riding circumstances while still having enough suspension force to deal with bumps while overloaded or leaned over hard. Race bike don't have to have any consideration for rider comfort "suppleness" or bumps/potholes. The sole purpose of the suspension on a race bike is to maximise the tire's contact to the track.