4 ms·
Vulcan-74 – A 6502 Retro MegaProject
- tlb 11y agoSounds like fun. Around the mid-80s I tried to build a custom GPU with dedicated raster op hardware, all with hand-wired 74LS chips and VRAM, and connecting to an Apple ][ bus. Parts of it sort of worked -- it at least generated a valid video signal and it could copy 16x16 memory blocks, but it was damn hard to debug with just an analog scope. You should decide what the rules will be for using logic analyzers. I won't think less of you if you allow modern debug technology.
- cmrdporcupine 11y agoI should clarify I'm not the author of the project. I just posted it because I think it's really amazingly cool what he's managing to get done on a breadboard.
- pvg 11y agoThey had logic analyzers in 1984, right? I think that's the general rule the author is trying to stick to.
- jacquesm 11y agoLogic analyzers definitely existed but cost stopped them from being present anywhere but professional r&d facilities. Scopes were omnipresent, if you had a logic analyzer in 1984 you were a local god and people would regularly offer you their firstborn for access.
- kwhitefoot 11y agoWe had Intel hardware logic analysers before 1984. I used them at the Mullard factory (Philips semiconductors) in Southampton to debug Signetics 2650 embedded controller problems around about 1980. Of course that's a long time ago so my memory might not be 100% precise. I wish I had kept a copy of the drawings for some of those projects, still look back fondly on those things, hardware was so much more fun in some ways than software which is what I do now.
- loser777 11y agoWhat are the typical functions/acceleration that this type of GPU supports other than the blitter mentioned in the post? I'm very surprised to see so few chips being used; doesn't 7400 logic only give you ~4-8 gates per chip?!?
- niklasni1 11y agoThe 74-series is not just plain gates, there are multiplexers, latches, counters, adders, and even complete ALUs.
- peterfirefly 11y ago+ shift registers, amplifiers ("bus drivers"), tri-state thingies, carry generation circuits (for faster ALUs, especially when you connect several ALU chips together for wider additions).
- cmrdporcupine 11y agoI believe his GPU (or VDP in the old terminology, GPU seems more specific to 3D coprocessors) can do horizontal and vertical scrolling and 100 sprites.
- beneater 11y agoThis looks like a lot of fun. A couple years ago, I built an 8-bit CPU from 7400 series logic gates on a giant breadboard and learned a ton. And it still works today! I strongly recommend a project like this to anyone who might be interested. I made a few videos demonstrating it: https://www.youtube.com/watch?v=9PPrrSyubG0 https://www.youtube.com/watch?v=9PPrrSyubG0 https://www.youtube.com/watch?v=35zLnS3fXeA https://www.youtube.com/watch?v=35zLnS3fXeA I'm slowly working on putting together a more detailed tutorial for building such a thing. I actually think with the right guidance this is a very accessible project for someone without much background in electronics or computer architecture to learn a lot from.
- cturner 11y agoThat was amazing. Looking forward to your guide. :) Thanks.
- cturner 11y ago@beneater - if I wanted to wire-wrap my own system like this, what's a sensible way to think about managing the wires, and what sort of boards to get? These are naive questions - I've done some electronics theory but hardly anything practical. I've now read a couple of tutorials about wire-wrap pen tools, but I don't yet have a feel for the boards. Maybe I'm googling for the wrong things. Also, what is the name for the thing that you mount a microchip in, in order that you have a lead to wrap around?
- pjc50 11y ago"Wire Wrap DIL sockets" are the thing you want. Obviously this requires DIL chip packages too. The boards are unplated veroboard with 0.1" hole spacing. It will be tempting to gather wires next to one another in neat rows, but this worsens crosstalk. You can probably achieve speeds of several MHz with wirewrap. With a small amount of practice it's the fastest prototyping technology and easier and cleaner to rework than soldering.
- cturner 11y agoThis is very helpful, thank you. In particular thanks for the tip about not lining things up in rows, because that's just what I would have done. I could probably write a script so that I could design things in neat rows on a screen, and then it could fit it for me in a tight bunch, and then I could wrap it. Are there smart ways to use decoupling capacitors to get more? How do you get a feel for how much room you have to play with as far as MHz? Is it just a case that you start with something small, and then go up until it breaks? Are there practicalities of what chip generations is possible with wire-wrap? 6502 would be possible with wire-wrap. What about Motorolla 68k? (Also - what is the most sophisticated 68k chip that's still commercially available? Speed and memory addressing are important, MMU is not.)
- fr0styMatt2 11y agoThis is the most epic hardware-related thread I think I've ever seen. Fantastic! :) I have an FPGA dev board and have wanted to do something like this; start with VGA generation and work my way up to sprites.
- blue1 11y agoI believe this guy http://c65gs.blogspot.it/ http://c65gs.blogspot.it/ is doing something like that, recreating the Commodore 65 that never was.
- icedchai 11y agocan anyone recommend a good electronics book ? i'd like to build one of these things but would like some more basic understanding first.
- jackhack 11y agoMake magazine's "getting started in electronics" is a fine place to begin. It is very basic, but has the advantage of making no assumptions about prior knowledge.
- davidjhall 11y agoDo you mean Forrest Mims "Getting Started in Electronics" or Make Magazine's intro book "Make: Electronics"?
- k2enemy 11y agoI highly recommend Nerdkits (http://www.nerdkits.com http://www.nerdkits.com). It is a kit, but the real value is in the excellent ebook that comes with it.
- davegauer 11y agoI second that recommendation. The real selling point for me was that they didn't try to make some sort of "friendly layer" for the beginner to work with. Instead, you build the kit from commonly-available components on a breadboard and learn how everything works from the ground up. Reading that ebook was a real revelation: exciting and a real boost to my confidence with electronics.
- foobarge 11y agoOne YT view leading to an other, I ran into this: https://www.youtube.com/watch?v=0jRgpTp8pR8 https://www.youtube.com/watch?v=0jRgpTp8pR8 7400 logic CPU, running a port of Minix, C compiler, assembler, TCP/IP stack, apps, etc...